OK I'll look into dominoing the four pieces of the leg together. Yeah if the top were permanently attached to the legs it would be almost impossible to move.
I will have to come up with a way to...
Type: Posts; User: Rob Dykens; Keyword(s):
OK I'll look into dominoing the four pieces of the leg together. Yeah if the top were permanently attached to the legs it would be almost impossible to move.
I will have to come up with a way to...
Hi Kevin
I am leaning towards having the two legs bridged some how, just need to figure out the best way to do so. I am rather hesitant on whether the angle brackets would prevent side to side...
Hi Prashun, thank you for stopping by.
I am going to make a mock up, I have some spare 2x4's lying around to dial the angle in. Thanks for your estimate on the bevel angle.
I used to be able to...
Hi Steve,
Join legs as in join the 4 pieces of the trapezoid to each other, or join the leg assembly to the table top panel?
I do have a Domino, albeit it's not the XL model.
Hi Jamie,
Thank you for your insight, it helps a lot.
I hadn't yet considered that I won't be able to cut the bridle joints with my table saw (which makes things look easier) due to depth, so...
Does anyone have an idea of what angle the legs would be cut at in the examples I have collected in this link? (https://imgur.com/a/zU7exI4) I'm guessing somewhere around a 10 to 15 degree bevel?
...
Thanks John, I am familiar with a few of those retailers but haven't looked at their DC offerings. I will go through them all with a fine tooth comb. When you refer to Amazon getting too expensive,...
Thanks all for the replies. I will check out these options. I currently have a sloped shroud on the bottom of my ridgid r4512 table saw but it's port is 4 inch. If I could figure out a way to modify...
Hello all,
I have been looking around for a source on 6 inch diameter dust collection accessories. It seems to me that the most commonly available are 4". As of right now I am looking to upgrade...