Search:

This doesn't help the OP but I experienced a similar problem using reclaim wood. It was hard maple from a submarine battery well. The wood had a wax impregnated into it that I did not notice when...

This unit has a 100 amp breaker in its bowels powered via a 20ft 10/4 running into a 220 wall outlet. The saw is wired 220v. The outlets have their own breaker. There is an outlet on the back...

You are correct that any OEM circuitry must be bypassed prior to installing aftermarket devices. I had issues with my PC router speed control. It failed once under warranty and again after I got it...

Looks like you've gotten lots of input. Some of which is beyond my skill level. My setup might be less expensive and simpler. I use a cast iron insert with a JessEm lift. PC7518 with a SuperPID speed...

https://sawmillcreek.org/attachment.php?attachmentid=386976&d=1527890790

I don't suppose this will help because my fence is integrated into my table saw but I have been very happy using Baltic Birch. This particular application has UHMW on the main slide area....

I bought the Porter Cable 7518. Within the warranty period the speed control failed. Shipped to repair facility and they replaced with an identical speed control that failed within 3 months. Take...

I would be uncomfortable allowing the EB-3 that far past the miter slot. Does it maintain stability?

Just finished this router box. Made from baltic birch. There is a 3/4" UHMW insert at bottom of face. The fence is 80/20 mounted on a VSCTools fence lock. The clear out cut was made to accommodate...

I have had success making drawers from 3/8" plywood. My garage drawers are regular junk Lowes ply. The drawers for my dresser were made from 3/8" baltic birch using the PC blind dovetail jig. The...

I paid $155 and $17 for shipping.

Table with a lift.

As I covered in a recent post the speed control in my Porter Cable 7518 has failed twice in less than a year. I sent it in for repair and it failed shortly after. On the recommendation of a fellow...

I already put down fence tape on rail assuming 1/4" fence addition. If it's the right answer it's the right answer. I have a 4'x'4' sheet of Baltic Birch I could use.

Wouldn't it be difficult to glue UHMW?

1. I've purchased a 1/4" sheet of UHMW to attach to my 80/20 fence. How often should I drill mounting holes? I have 4 nuts and probably need more (they aren't cheep).

2. The UHMW sheet has tool...

The output pulse is a +5VDC square wave. 1 pulse per rotation. I've seen some schematics that show the required circuits required to accomplish my task but I am not patient enough to do bread board...

I have taken the advice of multiple Creekers and purchased the http://superpid.com/ router speed controller. It took the company over two weeks to ship the device and is now in transit from...

I have experienced too much flex when using only one runner. Even with double stacked baltic birch.

Retired Navy elec tech. Submarines. Not an engineer per se but resourceful enough to tackle this. I'll post my results.

I sent an inquiry to VHIPE.com and they indicated the 7518/19 are compatible and used frequently. I ordered mine (looks like about 2 weeks delivery from Australia) and will post install updates when...

This device is rated for 2.5hp. The 7518 is 3.25hp. Not sure how important that is but I don't want to smoke a $155 controller finding out. :)

I don't think the same people actually own the degraded companies anymore. They buy a company with a good name. Slowly slim down production standards until people notice. Then they reduce the price....

I am in the process of bypassing the speed control module on my PC 7518 and wiring in my own speed control. Amazon has several options but all have some bad reviews. I suspect many of these reviews...

My PC 7518 speed control has failed twice and I can assure you the modulating speed observed when new is not the same as when it begins failing. The OP is describing the failure of his speed control....