Search:

The temperature that Richard mentions is the one used in an internationally recognized phytosanitary standard for treating wood products. The goal is to submit the entire piece of wood to a...

John,

I have not used the front track often but found it useful when needed. The Jessem cross-cut sled mounted on the Mast-R-Fence is useful.

John,

One data point: the center of my Mast-R-Lift sits 13 inches from the front of the table (Jessem top with track about 6 inches from the front).

As mentioned already the miter slot is handy...

Thanks Rod.

Always something new to learn everyday and this group is extremely knowledgeable and generous.

Steve,

Thanks for the clarification. We are indeed using 120/240 volts at 60Hz (residential customer). Certification (e.g. UL/CSA) would likely be required for export markets.

Lisa,

Please count me in if your son wants to run an « international » field validation exercise. 😁

Nice project to carry out with your son.

Regards,

J.

Fantastic work Lisa! Between your parallel guides for the slider and the motorized A3 you have given a lot of inspiration to some of us. Thanks for sharing.

Regards,

J.

PS: good thing you...

Kurt,

You raised a good point which made me realize that my needs/preferences as a hobbyist are most likely different than yours. I can live with the spindle lock - I sometimes use the « spindle...

Kurt,

I have the Bosch variable speed model and like its performance. I like the square base for registration but understand the desire for a round base for certain applications.

Have you...

Derek,

I remember seeing the « Mark I » version. Your improved version looks even better and will surely inspire many woodworkers, as your approach could be adapted to other products, such as the...

The outside diameter of the dial on my Hammer machine (the same one as Rod) is 84.5mm. On the Felder machines the dial fits inside the hand wheel. Short of having a hollow center hand wheel, I...

Mike,

Here is how I managed to insert photos so far:

1. Press the image icon

474779

2. Choose select file on computer

Luis,

Count me in as well for doubling the plywood. One day or another you will need to use clamps and not risk having the T-track lift off the work surface.

Regards,

J.

Matt,

I have been using the MastRLift for about 9 years or so. It is an excellent setup. The difference between the one you are looking into and my setup is the raise/lower system (handle versus...

…to follow up on Doug’s information, I am using a Makita 1101, which is smaller than your PC690. Sleep well until it arrives; it will fit 😁.

J.

Michael,

…you could also describe it as a « design feature »:D

good job!

Regards,

J.

I use the same adaptor that Paul mentioned above. Works very well. I am not sure if you have other machines using a 120mm port, but if it is the case, that adaptor allows you to easily switch from...

….glad to know you did not get hurt. Out of curiosity, was the riving knife installed?

Bob,

Part of the answer depends on the height/thickness of the lip you want to have. When the combination of lip/frame thickness allows, my approach mirrors :D Bradley's method. A stepped rabbet...

Kurt,

I am still in the early stages of learning how to use a slider saw. I have recently built a very basic Fritz and Franz jig and ran a couple of test cuts, just for fun. I took a piece of wood...

Derek,

I decided to order the 2000mm wagon with a view to be able to handle some/most of the operations on a full sheet of plywood when needed. The size of my shop (single car garage) did not suit...

Anuj,

this is a book that I found very useful when I built the cabinets.

472957

Philip,



Here is another option you may wish to consider: Royce Ayr dado stack - product # S-30 (12 inch diameter with 1 inch bore).

Will try to insert image from catalogue.

J.

Very nice design and ingenious adaptation for the feeder.

OP:

I have used the router table for tasks such as edge profile, rabbets, dadoes, sliding dovetails, cope and stick. Went from a...

Terry,

I have installed a DC-40 on my Hammer B3. The tube that comes standard with the stand is 27 inches long. Based on the information found on the ShopGear website, the long tube is 42 inches...