Search:

Ginger Snaps Perry. They come out around haloween time, and are really good dipped into cold glass of milk. Made in Bridgeport, Pa.

I save the sticks from popsicles and ice cream bars and use as spreaders for glueups.

:):):):):):):):):):).

Luke, Can you buy roll pins where you are. They are usually oversize, andare spli to act like a spring to give a tight fit.

I stopped putting gas in the generator a few years back. If the power goes out I will fill the 5 gallons and use it. I got tired of draining gas every spring.

My generator is 26 years old, a...

Luke, A 32 tpi blade has a tooth every .031 of an inch. .5mm stock is approximately .0195 thick,so, the stock being thinner then the gap between the 32tpi would cause the teeth to be sheared off...

Years ago I bought a "Speedy Stitcher", that is hand held made to do a lock stitch in heavy material and leather. I have used it to repair my wifes hand bags.

I bought a set of straight edges from them quite a few years ago. One of the straight edges was chipped very badly, probably like that from the factory.

I returned them after contacting customer...

Roger, I just searched for a 5-44 bolt online and came up with numerous choices with a socket head cap screw. Amazon has them.

You may even find one at the hardware store.

The thread that Ron listed is the correct size. %-44 is a standard #5 fine thread size.

Roger, If you find a 5-44 threaded bolt online it will be the correct bolt. The major diameter is listed as...

They are so cool Andrew. I think you have a talent for making them, and they seem alive and well.

Merry Christmas

Wen makes a 6.5 ton electric logsplitter for 297.00 on Amazon. Would have saved him alot of work.

Curt I have the Hitachi M12v and although looking at it took some getting used to I cannot believe it is not more popular. It has excellent fence and quick release collets,
1/4 and 1/2 inch that...

I think the cherry looks nicer then the original Lee. Nice repair to a challenging situation.

When you tighten a drill chuck it is important to tighten all 3 points of the chuck to get maximum grip on the drill.

As was said already the drill is probably dull, but also the shank part of the...

Nice story Dave. Made me chuckle.

A piece of brass flat stock was kept in many machinists tool boxes to clean their files with as you have described.

Not letting the file get over filled also helps. In other words clean your...

I am enjoying the videos. Thanks David.

I bought 3 gallons of Raw tung oil from The Real Milk Paint Company, and also 2 gallons of natural citrus sol from them when I put in my wood flooring, over ten years ago. Highly recpmmend it. I...

Blue Dykem is what I was taught to use in shop class in the Navy. Put it onto the rule liberally to fill the engraved lines, and then use something flat and stiff to wrap a thin cloth around with...

I used a clear white candle on my kitchen drawers and that was 20 years ago. Still sliding smoothly. Must be paraffin wax.

Couldn't have said anything better.

Sorry for you and your families loss Glenn.

Wish I had something to post, but I am enjoying the different outstanding pieces made by the people here. So much talent, so little time.

Such a unique piece with beautiful carving. Really nice work Tom!

I got a Hitachi M12V a few years ago for 200.00 new and it came with a nice fence, 2 collets and some centering attachments. Dust shroud works well with my shop vac and the 15 amp motor sounds smooth...