Search:

Hi Bernie,

Not sure if this is what you're looking for, but I had been in touch with the folks at www.ecogate.com a while back. They have different offerings, you might contact them and see if...

Hey Mark -- I recently went through this effort for my SCM S540P.

Here's a pic of how it ended up, I used steel U-channel, 28" long, 7" wide, to allow the leveling casters to turn.

Please let...

Will be ordering ATEX in the morning, thx for connecting the dots --

Agreed !!!

Derek - my shop is 11.5 feet from bottom sill to bottom sill. I can squeeze a bit more space, maybe 4" if I don't have any insulation in the wall cavity. I wanted to be able to handle an 8 foot board...

Great, thx

Hi Derek,

In case it helps, I'm attaching some photos of "today's version" of how I'm moving stuff around to accommodate the slider.

476937
476938
476939
476940

Please let me know if...

Hi Bob - thx for your reply - any idea who makes a hose that's smooth on the inside, that's also anti-static? Everthing I'm seeeing on the web looks "ribbed".

Ned

Jim - I didn't even attach that table, and I still have to crawl under the wagon, so the only potential solution in my case is to shorten the fence that rests on the wagon, perhaps 3rd party.
...

Hi Derek,

I partially solved this problem by not using the rip fence at all, so I didn't install the long metal tube that the rip fence rides on.

But even with that, using the outrigger plus...

I'm in need of a bunch of 5" anti-static flex hose, not sure of which type(s) might recommended, and potential suppliers. Had a look at the Oneida site, but they sell 3:1 compressed hoses, which I'm...

My shop has 1" foam on top of ancient concrete, and on top of the foam I used Advantech, as recommended by someone on this forum. I did this mostly to support the ability to move machines around, as...

Thanks very much to all who responded, very informative - really appreciate it

Hey folks --

Thinking about how to safeguard against lightning --

I have a sub panel in my shop, connected to the main panel in my basement, about 150 feet away. I can flip the breakers on...

Just heard from Mr. Lamb about this, and he suggested adjusting the fence using a different sequence than detailed in the instructions. Will try that, and report back.

thx again for trying to...

For me, wagon = aluminum slider, apologies for the confusion.

Outrigger not in play here --

Will try and get to that today/tomorrow. Thanks for your feedback.

When I do that, it flows easily over the operator side of the wagon, but catches on the far side. Raising the fence further only makes it worse, of course.

I could leave it at a...

I have the exact same setup as David - 3 bases/dials.

My current issue is that once adjusting the Lamb parallel fence I have with the operater-side of the wagon, it can't make it all the way...

Thanks for responding, Erik, appreciate your feedback.

Thanks, Kevin

I had watched the YouTube video by David Best about how he adjusts a Felder to compensate for the type of variance I'm seeing, video can be seen here:
...

Forgot to mention that I have the outrigger attached, which is probably not ideal. Then again, applying even modest pressure to the outrigger resulted in moving the dial indicator fairly...

Hi everyone --

Still waiting for the electrician to wire up my equipment, but in the mean time, I'm checking what I can check.

I have 3 magnetic bases, each with a dial indicator, and wanted...

got it, thx much Jim

thanks much to all who replied, much appreciated