Search:

I guess that I am the odd one as I do not like or use a foot control. I have back issues and using a foot control causes problems.

Of course,it depends on what type of work you do. I do not do...

Very impressive !

I looked all the gates I could buy and ended up making my own. It is a great woodworking project. I am considering making new ones based on the ones shown above.

Interesting ideas and very useful. Besides the slot, using with a magnet or Magswitch would be useful.

Are you going to sell the part or 3d print plans.

Like any tool, one needs to learn to use it. If you are breaking so many blades you are doing something wrong. It is not bandsaw. I can turn the material and easily follow the lines.

Can you...

I am new to the Laser but made this ornament.. I have made several and painted a few.
511262

Unless the OP opens up the ports on the machines to 5", going to 5" pipe will make little difference. In addition, given a smaller dust collector and the losses thru the dust deputy , I doubt the...

A fan anemometer is a bad way to measure flow and gives answers all over the place. Doing accurate or even semi accurate velocity measurements is difficult.

I have the Ortur LM3 A d having fun with it. I have cut 1/8 BB with it and made the ornament with it. I also built an enclosure for it with inline fan.

511059

511060

I would stay with the 4". I do not think any potential improvements by using 5" justify the cost.

I am so glad that I do not have this difficult problem. I never think about the noise except my wife gives me a hard time when I use my DW735. Thankfully, my neighbors are more than 100 ft away.

This is tough. I really like my Sawstop PCS because of how smooth it runs and the fit and finish. However, i love my Nova Viking Drill Press. It runs so smooth and changing speeds is so easy. I...

They make one now that looks similar but allows downloading data. I would like to have that one to see how dust levels vary with time.

The McDermitt Caldera on the border of Nevada and Oregon is a huge lithium deposit. The EV batteries also need a lot of graphite and a new mine in Alaska is opening.

I monitor all the data and enter in a spreadsheet. But, I am mostly interested in the smaller particles. Occasionally, I will do a test using a tool with and without the dust collector on and...

On occasion, I will check the dust levels in my shop using this PM Detector. It is available on Amazon for about $42 and also on eBay. I will hang it at about head height near whatever tool I am...

This is what I made for my lathe. The end is a bell mouthed hood which is extremely good for sucking the dust.

510148

Very nice LJ done. How did you do the inside of the drawers to hold thread?

My water is awful and changes at times. It has high hardness, iron , sulfur, Manganese and others. We have had an air induction filter inline before the softener. It gets rid of the iron and...

We had filters but now use an reverse osmosis unit. It gives great water.

I have had a similar issue with a keyless chuck and large (3") hole saw. I finally got it loose with a large strap wrench but was not easy.

I use the miter gauge track on my router table to hold feather boards. I have never used it with a miter gauge.

Congratulations

I had a neighbor pull the older pins. I was putting in a fence so got new survey with pins. I also drove a 6 ft steel post next to the pin on my side of the line. The neighbor had been there for a...

I get calls that suggest they are from Medicare. I am certain some older people are confused. It is so sad that businesses are set up to scam people.