Search:

Type: Posts; User: ray grundhoefer; Keyword(s):

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. Northfield is still making woodworking tools here...

    Northfield is still making woodworking tools here in minnesota. And no they are not related
  2. Replies
    21
    Views
    1,577

    The cable is not being used in a structure. It is...

    The cable is not being used in a structure. It is intended for an underground feeder to a separate building which is what it is designed for. If it is not being used as a main service you have to run...
  3. Replies
    31
    Views
    1,950

    I have a 3875 woodmaster that works very well as...

    I have a 3875 woodmaster that works very well as long as you make a light cut. Ive never used a cantilevered design but I can see where taking off to much could mess up the drum to table dimensions
  4. If you don't bond the neutral to a ground rod or...

    If you don't bond the neutral to a ground rod or building steel, no you cannot just tie it to the ground wire in your supply cable. You will have an isolated system with no voltage to ground....
  5. Replies
    39
    Views
    2,467

    A bit off topic but I went to work on my truck...

    A bit off topic but I went to work on my truck brakes today . Pulled out my metric socket hmmm 17 mm to small and 19 mm to big. Guess what they also make an 18 mm ,just not part of my set. Off I go...
  6. As David said you have to make sure you can...

    As David said you have to make sure you can ground the high voltage side if you are going to hook it up like that. your typical 480 to 240 transformer does not have a neutral point on the primary...
  7. Replies
    32
    Views
    1,394

    for blast gates and hose try blastgateco.com,...

    for blast gates and hose try blastgateco.com, really good prices on blast gates
  8. Yes if it's a 10 hp starter it would work on a 10...

    Yes if it's a 10 hp starter it would work on a 10 hp motor. However as a couple others have said a size 2 square D starter would probably last you forever, this one maybe not
  9. Try a place called e-conolite.com. We have...

    Try a place called e-conolite.com. We have installed many of their wallpak fixtures and have'nt had any problems with them. I would go with 2x4 LED high or low bay fixtures if it were my shop wa
  10. Replies
    14
    Views
    799

    You could heat up the pipe with a torch or heat...

    You could heat up the pipe with a torch or heat blanket to put the 7 degree bend in it. do it all the time with electrical pvc. You have be careful because it burns easily though
  11. Voltage drop is only an issue when you get up in...

    Voltage drop is only an issue when you get up in the 75 to 100 ft range. It also matters how much of a load is on the circuit. A #8 fully loaded to 32 amps would matter more than one having 26 amps...
  12. you can get whats called service entrance cable...

    you can get whats called service entrance cable SER will have 2 insulated wires and a ground
  13. you can run #8 copper for the dust collector....

    you can run #8 copper for the dust collector. could probably go with #4 for the power to the phase converter if thats the only motor you are going to use it for. if you are going to add more...
  14. I have had a powermatic model 50 for 10 years...

    I have had a powermatic model 50 for 10 years (green one). would like to get an 8 inch. havent found one for the right price yet. I would buy what you can afford now. You can always upgrade later.
  15. OWWM.ORG rule #5, in the amount of time it takes...

    OWWM.ORG rule #5, in the amount of time it takes you to decide if a good tool is worth the price someone else will beat you to it.
  16. Very good jointer for that price. I went to look...

    Very good jointer for that price. I went to look at it on line but it is sold. Did you buy it or did someone beat you to it.
  17. I think you should get rid of that jointer and...

    I think you should get rid of that jointer and buy a new one. Just dump it by the side of the road preferably right next to my driveway please
  18. Replies
    17
    Views
    10,739

    Took a while to find 6" 2729 for my system this...

    Took a while to find 6" 2729 for my system this winter also. As said menards only sells it in bundles of 26. I looked around on line and found it at the mills fleet in monticello mn When I went to...
  19. Replies
    38
    Views
    2,252

    If second hand is okay watch for a used...

    If second hand is okay watch for a used woodmaster. they are built very well . I picked up a 3875 2 years ago . It does what I need
  20. Replies
    43
    Views
    3,078

    Yes I know, been an electrician for 40 years....

    Yes I know, been an electrician for 40 years. Silly thing is all you have to do is attach box to floor with an L bracket and then its legal
  21. Replies
    43
    Views
    3,078

    stub a piece of 3/4 steel ridgid conduit up...

    stub a piece of 3/4 steel ridgid conduit up through floor. securely fasten it the floor joist below so it cannot move. then screw an aluminum bell box onto it . you could even put an in use outside...
  22. The biggest problem I see with dust collection...

    The biggest problem I see with dust collection under the floor would be if you get water in it ,yes the sawdust might stick but worse would be the possibility of mold growing in there if it's always...
  23. The sound of my unisaw bullet motor starting up,...

    The sound of my unisaw bullet motor starting up, Most satisfying is glueing up a raised panel door and finding that its perfectly square
  24. Replies
    16
    Views
    2,614

    Go to a commercial building remodel job and ask...

    Go to a commercial building remodel job and ask if they are throwing away any old solid core wood doors. they make great workbench tops. I've got several of them. Laminate covered ones also make a...
  25. Replies
    17
    Views
    1,420

    I have a3875 woodmaster single drum. Very well...

    I have a3875 woodmaster single drum. Very well built ,works great. True a drum sander is slower than a wide belt, but it depends on how much wood you run through it. If it was used a lot every day a...
Results 1 to 25 of 51
Page 1 of 3 1 2 3