Search:

Type: Posts; User: Jaren Johnson; Keyword(s):

Search: Search took 0.00 seconds.

  1. Got a new fence, custom sliding table, and a mini edge sander on Delta Shaper

    I’ve been tinkering around with a Delta 1 1/4 shaper and trying make it so I can do a few steps in one. I use this shaper only for the outside profile shaping on doors and drawer fronts.

    So far...
  2. Replies
    7
    Views
    863

    We do use a spacer above and below the bearing...

    We do use a spacer above and below the bearing rub collar. According to my dad, who also works at the same place as me, when they first got the Unique they forgot to tighten the nut, so the rub...
  3. Replies
    7
    Views
    863

    Stuck rub collar on shaper spindle

    So at the shop Iím at we have a Unique Shape and Sand that is used for raised panels. The Unique is probably the best shaper in the shop, I canít feel any chatter at all after a panel has been cut...
  4. Iíd say the widebelt is roughly the same as that,...

    Iíd say the widebelt is roughly the same as that, and the orbital is probably 15 fpm
  5. Replies
    3
    Views
    525

    At the shop I’m at, I’ve noticed we never make a...

    At the shop I’m at, I’ve noticed we never make a single cabinet door wider than 22-23”. After that it gets divided into two doors. The strength can change depending on the wood, but also the width of...
  6. Iíve been reading his articles, and itís starting...

    Iíve been reading his articles, and itís starting to make some sense. For the current setup we should only be taking off about .022Ē instead of about .031Ē. Iíll have to let the boss know if he wants...
  7. I have tried sending the doors into the orbital...

    I have tried sending the doors into the orbital right after the widebelt, but it doesnít seem to take any cross scratch off at all unless I really force it to by going 1/32Ē to 1/16Ē under the...
  8. How to make sanding faster with current setup?

    So Iíve recently been in charge of making doors in a cabinet shop and Iíve been trying to make everything more efficient and less time consuming. So far sanding is the largest time sink. For sanding...
Results 1 to 8 of 8