Hello Paul,
I apologize for the problems on this. In your original post you mentioned I-cut and k-vision. These are two completely different systems so we need to determine which you actually...
Type: Posts; User: Derek Kern; Keyword(s):
Hello Paul,
I apologize for the problems on this. In your original post you mentioned I-cut and k-vision. These are two completely different systems so we need to determine which you actually...
I have noticed that when importing .dxf files into Corel sometimes breaks up what you thought were continuous lines into many smaller line segments. To fix this use the 'pedit' command or go to...
It seems to work for me as long as it is 1pt or less.
I like that idea. I have one that is very very similar to this! I have attached it.
There needs to be two things shown by the artwork. Marketability and System Quality
Marketability- It needs to be something that could sell anywhere.. no matter if your in a different country....
Helen-
Just a word of advice when looking for this system. Not only should you be concerned about the cost of the equipment itself, but the cost to run it(electricity, other consumables),...
Posted settings above.
Great Idea! BUT..... it says plain as day on Gantry Co. website that this is not allowed. Which makes perfect sense. Its the same as ripping off copies of any software and...
I have done 3D on as little as 50 watts but it just takes longer. The pieces size was about 4 by 4 inches, I used 600 DPI, 45"/sec engraving speed, 100% power on my 400 watt laser. Took about 12...
I don't mind sharing Frank. I believe the price on that piece was around 200 dollars. I see it as a bargain for unlimited use and its detail.
I know Gantry Co. has been brought up before on this forum but I just to throw some more recognition their way.
Lou Saye at the GantryCo.com has again supplied me with a great 3D file and the...
Hello Everyone,
When I print over a filled box the vector outline shows up fine but the fill will not print over. If I check "print to bitmap" in print->advanced.... it will work but then print...
We don't have a heap of customers here but the ones we have are top notch! I check the Creek daily to make sure all of Kern's customers that utilize this great site are getting their questions...
I am looking for the same thing, high resolution photos to put on 4 ' x 4' marble murals. Anyone have a good source?
Thanks.
I just had a sales inquiry from Australia wanting to buy a laser system.
Same exact story wanted to make a down payment with his visa card. Wanted to use a 50 watt laser to cut keys... He didnt...
One more to check out.
http://www.eternalimage.net/
Good points Gary, I would not even consider a flying optics table for a strictly metal cutting application. Most systems that have a laser mounted on the x axis can travel at fast enough speeds to...
Michael-
A 150 watt laser will cut 1/16" mild steel and stainless steel.
Welcome to the Creek Will! Glad to hear you picked up some laser systems, I see you did end up getting that 2200W laser. Give me a call when you get it running, im interested to see how it is. Let...
Oxygen assist come out of the laser nozzle at 40 psi cutting and 5 psi for piercing.
Ah yes mild steel, 1.5" diameter.
Stainless is coming soon. Just setting it up.
Just did some metal cutting with a Kern/Synrad 400 watt system. Wanted to share the results.
1/8" at 1"/sec and 95% power
1/4" at .3"/sec and 95% power
5 psi of o2 piercing, 40 psi of o2...
Scott,
The photo looks like it will turn out OK without any color adjustments. I can run it on my machine and see how it turns out if that is OK with you. Then I could post a pic of the results....
I too have access to the Beta Version that they have released. I finally was able to use it today at work and there are many improvements from the previous version. There is a TON more material...
Here is another one.