Search:

I've had the 2675 Woodmaster for over a year now and love it. It replaced a Delta that I always had to adjust something when using it. Not so with the Woodmaster. I also bought the infeed/outfeed...

Thank you all for your comments and suggestions. I realize that hand/machine sanding is the safest way with good results. And if I were only doing a couple of these parts that is the way I would go....

I've always hand tightened and then used some kind of filter wrench to tighten another quarter turn. The The bottom filter sockets work better than strap wrenches. I've also learned that hand...

I am helping my brother with a project for his church that involves me making handles for statue carriers. The material I'm using is hard maple that is 1 3/4 inches thick. I have a pattern made where...

Thank you all for your positive comments; I really appreciate it. I actually don't make too many "small" items like this but they are fun to work on.

For years I've enjoyed my reclining sofa with a fold down console in the middle. It happens gradually and one day I realized that I was sitting "in" my sofa instead of on it. I decided to replace it...

483267483268483269483270483271

482707482708482709482710482711482712

If using regular wood or plywood and cover with formica you are correct in that it seals against moisture to keep the top from warping for the same reason you always apply finish to both top and...

Like Jim, I was also involved a number of years ago with the breach of government data and was offered free monitoring service that is still working for me now. So I also suggest you take the...

I recently made a new router cabinet and for the top I used 2 pieces of 3/4" MDF and glued formica on both top and bottom. And yes, hardwood banding all the way around. MDF will be much more...

As always, very clever design and beautiful craftsmanship Kiyoshi. Thanks for sharing.

Andrew, the Grizzly bags I linked to do fit my 55 gallon drum. Strength is a big consideration for me and the Grizzly bags are 7 mil. I have several and just keep reusing them. I'm not sure why some...

481867481868481869481870

Andrew, I have the G0441 which is the non-hepa version. It has the same 55 gallon collection drum. I used to buy a 3 pack of bags from them but at some point it they stopped offering them. But you...

Both wheels are sold now.

Chuck, I sent you a PM yesterday. Better respond to me soon or both wheels will still be up fro grabs.

The posters that talk about a torque stick are correct in that reputable tire shops are supposed to use them. But frequently I think that they may not get used or that "Joe" is using the one that...

I had a Generac generator at my last house for 11 years and have one in my current house going on 8 years now. I installed both myself and never had a service agreement. I was astounded at the cost...

I do not do much wood turning so these wheels have been lightly used in the year and a half I've had them. I have been doing more metal working lately and have upgraded to their Mega Square wheels...

Steve, Jerry is correct about Picatinny rails being made out of aluminum and then anodized. A few months ago I had a friend who has an early 1900's hunting rifle that has a claw mount. He wanted to...

Steve, a couple of years ago I wanted a new helmet and did a lot of research at the time. The Lincoln Viking always seemed to come out on top or near it so that's what I bought. Been very happy with...

My floor stand spindle sander uses 9 inch sleeves and even sanding 8/4 most of the upper section doesn't get used. If they get worn or loaded up too much I just pull the sleeve out and reverse it on...

479483479484479485479486479487479488

479364479365479366479367479368