Search:

Something else to check. Do you have it set for Raster or vector? if you want to cut and have nothing to raster, it will tell it is done.
HTH

Real Mercier

I have a mini 24 50W. I had a similar problem. What I found was a spot on the window where the beam exits the laser Just before the mirrors. It was a clear spot and couldn't see but felt it cleaning...

On the Epilog you have the option to engrave from the bottom up. This way you are not pulling the smoke up over the engraving.

Hope that helps

The first question I would ask is what are you using for the sandblast mask? Is it a paint mask for simple blasting or are you using a thick rubber mask (Anchor type)? The Graphtec may handle the...

There are instructions for removing the plunger on the Epilog website. It is very easy to remove. I don't know if I would use Tim's technique. The focus tool is used for everything. Once it is out, I...

I have the Epilog Mini 24 also. It came with a focus tool and I use it. The auto-focus is great for flat material but gets in the way for round work. I took it out and have not put it back in. Use...

I also have the Mini 24. It took a while to get used to it, but the Set Home and reset do work. They do have to be simultaneous. Even though I thought it was simultaneous, it was apparently not. Once...

I have my Epilog setup as a wireless printer. If you check the Epilog Knowledge Base, there are instruction on how to do it. It works for me. This has allowed me to continue working on the computer...

I laser engrave Motorola 2-Way radios for a local ambulance service. They engrave fine. No problem.

Hope that helps.

Real Mercier

It looks like the overlapping of the individual letters. Select it. Under Arrange>Shaping>Weld. This will convert it curves and make it a single piece. One step.

Hope that helps.

Real Mercier

Please include me.

Thanks

Please include me.

Thanks

Please include me.

Thanks

I don't know if this is your problem , but I find that Corel can only weld two objects one time. for example, if you three objects to weld, you need to pick two, weld those and then select the next...

This is a Excel sheet that figures out the calculations of what the graphic distortion should be. I have only used it a couple of times but with vector files. I haven't used it with bitmaps. I would...

Please include me.

Thanks
Real Mercier

I have the Epilog Mini 24. If you look in the manual at section 7 - Configurations, it will explain how to save all your settings. Essentially once you have all your settings, go to the advanced tab...

" I have a lot of contacts in this field. If you do this for me (for nothing of course), it will generate a lot of business for you"

Real Mercier

If I understand correctly, I would suggest adding an outside contour to make the letters wider.

Real Mercier

Check out nationalbalsa dot com

Real Mercier

When I do pens on the rotary device, I ask pen makers to bring me the blanks before they assemble them and I use the pen mandrel to mount the blanks on the rotary. I also ask them to bring their...

My wife and I started doing craft shows about two years ago. We cut small signs with popular sayings. They sell OK. But what I found is that the exposure we got is real good. We get a fair amount of...

I have done some engraved pens filling with a two part 5-minute epoxy. I used the MIXOL tints I got at my local Woodcraft. It comes in a variety of colors.

Hope that helps.

Real Mercier

I am not at my workstation right now, but if you type your name and it is selected Corel will tell you the width and the height of the selection. Just type the dimensions you need. Make sure the...

I agree it is a poorly scanned image. We can't see the rest of the file, If it is only text, I would retype the text and use the image for sizing and placement. Once done blow away the image and you...