Search:

The temperature of the glue and material at that time was probably in the low 40's. I had been using another yellow glue tolerant of low temperatures and this was my first use of TB3.
It has been...

I had read an earlier thread mainly about TB 3 and was a bit concerned by the mixed reviews,particularly with regard to joint failure. It's always good to know what limitations others have found and...

All the curved lams have been exterior,all are mechanically fixed in place and have had water thin epoxy sealant followed by a four coat paint process.
West system for when longer open time required...

The "dime trick" is clearance to allow the waste to clear as it cuts.

I have used gallons of this for many laminated curves and many other glue ups in an array of dimensions primarily for external non structural applications.
And it's waterproof....
I apply to both...

The string you entered for the image verification did not match what...

Makita 18v 61/2 is light.Good power to weight ratio,has a purlin hook too.
If you're right handed and plan to use a speed square as a cutting guide,which is a good idea because of the blade...

You really have to consider what your use will be.
I use an 18v 61/2" Makita extensively for 2x framing work and general construction.
Limitations are that it only cuts just over 2".It's brushless...

Watch the level of suction,it can lead to excessive sanding marks.
Less so with abranet.
Festool has adjustment for suction level,not sure about the others.

I'm away down in the deep south Pacific.
The replacements I put on when I first got the saw were from Sco/Sarg.

The issue with the tyres threw me out as the manual said to always track the teeth off the front edge,other info said euro saws always have level tyres.
At a thousand $ a time I don't want to shred...

After a great deal of reading,mostly older threads on SMC,along with advice from a more recent thread and many hours of hair pulling I am finally able to repeatedly split a line ripping full...

There's no switch lock with the Deros is there?

By the way,the festool ETS EC is between $1280 and $1480 here...
Not U.S.

Both the festool ETS EC and mirka have a lower profile which should help with any tendency to roll,and are nicer to use than the taller types.The festool at least has pads of different hardness,not...

Excellent helpful thread for me.
Erik in particular.

Infeed and outfeed support extensions.
Rip the log in two with a chainsaw first?

Thanks Dave,good video,much appreciated.
I do use sharp chisels and sheer scraping.I have more expermenting to do.
Unfortunately unable to view your image.

Thanks Bill.

How big are the logs?
You'd need a sled to secure and control them.
And amongst other things...
Infeed and outfeed support.
Two people.
A suitable blade.
A powerful enough motor.
Oak sapwood...

I'm green turning,will shellac stick to wet wood?

So prior to mixing up the belts instead of putting on a new pair started a disastrous chain of events?
I looked up the manual for the grizzly 636 and the setup is essentially the same as a centauro....

Thanks Kevin,
Agree,I like to keep it simple where possible.
And agree with starting with simple cures first.
I thought I'd done that and thought it didn't work...which sowed seeds of doubt for...

Interesting thread starting with Bill Space 09/2018

Surely the adjustable motor,if I understand that correctly,is a minor thing as long as the pulleys are reasonably well aligned,unless they have moved on the keyway, and the belts under suitable...