I had the A3-31 and the fence did not like to stay in place. It liked to shift out of position so I would get inconsistent edge joints. Drove me nuts as I went through trying to square it up numerous...
Type: Posts; User: Andrew Templeton; Keyword(s):
I had the A3-31 and the fence did not like to stay in place. It liked to shift out of position so I would get inconsistent edge joints. Drove me nuts as I went through trying to square it up numerous...
I can tell you that I have had both the Hammer and the Minimax machines... I had a terrible experience with the Hammer as the fence leaves much to be desired. I also wanted a powered bed so I am...
I find that with the garage open that most of the residual odor is gone within an hour. Even with the garage open, I still use a respirator though like I do with finishes.
My question would be does the Nova have the 3 phase 8 HP motor in it or does it have a 1 phase motor? (likely a 4.8 HP motor like I optioned in my FS 41 ES if that is available on that machine). Not...
To me it is a no-brainer to go with the SawStop. They are well built and the safety feature is something that you may think you do not need until you end up needing it. I like many know plenty of...
I have nothing but good things to say about my Jet JDP-17. I have looked at the Nova numerous times and played around with it, but I never found the desire to swap up to the Nova which is...
I've yet to ever find a use for anything over 1" pins so far. I am typically only using the pins for situations where I am waiting for glue to dry on some small trim pieces or for attachment of...
I am 100% with you on this one, it is super rare that I ever change that setting. Then again, I have only had the joy of having had to set the beds on a Hammer combo unit. I have not had to do it on...