Search:

I've been very happy with my Bosch 3725DVS, but after many years it just died on me yesterday.
I just ordered a Bosch ROS65VCL...which is a kit that comes with 5" and 6" platens in a nice case. It...

Update ....

CWW sent me a new head, and I just finished installing it.

YES! Looks good!! Very nice finish.
There are very slight, even scallops all along the width of the board (to be...

Quick update:
I took all the cutters, off, rotated them 90 degrees, and reset them all with a torque wrench to 55 in/lbs. The cut was slightly better, but still not good at all.
I have another...

Lee Valley sells an apron with the same strap configuration. Different (I think better) pockets though, and tan color.

I was taking a minimum cut on some already finished oak... prolly less than 1/32", just enough to make sure I was cutting the whole board, and running on the finish speed.
It seems like re-seating...

I started this thread on another forum, so I should try and keep cut and paste to a minimum...

I recently purchased a Dewalt 735/Shelix head package from Canadian Woodworker (a great deal…$1000...