Search:

I have a jessem phenolic router table and I have the smallest powermatic poweer feeder on it. I drilled 2 of the holes through the lip on the back metal strut that supports the top. The other 2 holes...

I see a lot of poplar like that at my local menards. I do buy it occasionally even though it is expensive there. I made some French doors out of mineral stained poplar similar to this a few years...

I had a 20 inch shopfox with a mobile base and it was very easy to move around. The shopfox replaced a jet jpm15 and the Grizzly was replaced by a oliver 25 inch. There wasn't much I liked about the...

I have an update to this if anyone was curious. I did get this under contract. Im buying it on land contract for a 4 year term. Here are a few pictures I took while walking the property. There are...

Some inspectors in my area won't allow staples for sheating. I have never seen them used for framing. I only use nails for sheating.

I have seen lots of these fora sale very cheap on Craigslist and they usually sit on the for a long time. I don't believe there is any value in these types of items.

If you have a local bessey dealer that might be better to go though for your warranty. I have never had an issue with my k body clamps however I do have quite a few irwin parallels so the bessey...

I will probably be the minority here but I had the g0858 and I didn't like it. It seems underpowered to me. It is listed as a 3hp but seems to be weaker then the 2ho powermatic i had used prior to...

I have quite a few milwaukee m18 tools. I like most of them better then the dewalt flexvolt and the Marita 36volt. The high voltage batteries have a lower amo hour capacity so I haven't really seen...

I have the x17. I have had it it for about 5 years. It has always worked good for me. I have probably ran 150-200 gallons through it by now. I would suggest you get a couple different length...

I have a rotary surface cleaner attachment for my pressure washer that works very well for cleaning concrete. You can use muratic acid on any real tough spots. I would imagine you can rent a surface...

I try and stick with the fuel line from Milwaukee. I have found them to be much nicer then just the regular m18 line. I also have the fuel worm drive that I like better then this style.

Order some from edge supply thanks

I'm struggling to find 5/8" prefinished hot melt edgebanding in a larger roll then 25'. I have bought this off ebay for years in 250' rolls but now I can't seem to find it. I am trying to avoid...

Menards just started carrying the bessys. Menards frequently have a 11% rebate. My understanding is home depot will match the after rebate price if there is a Menards close by. This only applies the...

52" rails are available for all pcs models. I would think a rail that is 48" has been modified.

They are 1 1/16 bore, 3 inch stroke, I believe the rod is 5/16 possibly 3/8. I did look for a extrusion that I could stack on top of the existing one however it was a odd size and the t track is not...

I'm not getting any defection of the miter gauge but more of the bracket that I made and the rod of the cylinders. This shaper came with a cam clamp that was mounted to the post on the miter gauge. I...

There is a road up to the top of the hill and the land at the top is reasonably flat. It is not land locked. And there is power to the property. There are some very steep part and others that are...

Ok I have an update on this I came up with a different hold down but it has its own issues. There is too much deflection in the cylinder rod to hold a workpiece securely. If I crank up the air...

Luckily the river in this area is over a mile wide so the water says a constant depth. Neither of these are in a flood plain.

I can see the potential neighbor issue, but if someone were to build on it the structure would be a good bit away from mine. The top of the hill is the only build able area without a ton of dirt...

I can figure out how to do this on Google earth but I did get a couple of 3d images that show it a little better.

478946478947

I understand it is a regional issue. There are several 500k and up houses on these bulffs most are on about 2-3 acres. The houses you see in the town are mostly around 150k

That was a good guess from a few pictures! It is de Soto. I own the old grocery store there as well that I will eventually move my shop and house into. I really like the town.