Search:

After looking at it again the joint isn't going to gain much added strength even with the domino's glued. I will presume the board is 3/4" thick and there isn't going to be much strength no matter...

Agreed, empties are most vulnerable. That and double stack containers and auto racks. The high profile and weight often being lower in comparison to many other types of loads.

Normally with "Sulphur" water air injection can work or a holding tank that's not pressurized and vents to atmosphere will allow the gas to basically rise to the top. You would need a second pump to...

I think there were several cars knocked over, and trees and debris on the tracks. If you google it there are there are other photos and videos showing more of the aftermath.

This BNSF train crew caught this video. Whenever there is a tornado warning for a specific area train traffic is stopped. It's better to have a parked train knocked off the tracks than a rolling one....

I think in this application using a finger joint router bit would give a much stronger joint. There would be a lot more area being glued and rather than a butt joint it would be almost all face...

A few days late on replying here. I had an MRI on my shoulder in 2021. After two tries. Because welding was a regular part of my occupation they X-rayed my head to make sure no artifacts were present...

One has to wonder and I am in a SawStop FB group. There are a good number of unexplained activations that some owners have had. Sometimes more than one. No flesh contact, no obvious metal, no high...

I have the Ryobi backpack blower with dual batteries, It works very well other than it's heavy. I sit it on a bench to strap it on. I think the smaller 40 volt version would have been fine. For the...

No squinting needed. Kind of like the color blind test pages. Either you see the numbers or you fail.

I believe for VCarve Pro after 4/30 it will be $195.

Are there no machine/welding shops in your area? Seems like something a decent machine shop would be able to do. It's been 30 years since I had any involvement spray welding. What I recall was the...

Following your project closely. So at this time you don't have the ability to "index" if you were wanting to do some sort of fluting? Basically at the moment the 4th axis is just a rotary spindle on...

I don't know if they always have but the Rockler vises now have "Rockler" cast in the handle casting. It's visible in the photo. Woodcraft has an identical looking vise as well.

Looks like they knew what they were doing. Cast iron has to be flooded with coolant to or it will do ugly things when grinding. As Cameron said wax it now and enjoy.

In reference to the "pig" that Malcom mentioned. I drove by this company many times while I was still working.

https://www.plcpigs.com/index.html

The way I read it and how I have always understood it is it is all blended at the distribution point. This says the additives are blended at the terminal. From your link.

Petroleum refineries...

I had to put rear brakes on my 2014 Silverado last summer at about 99,000. Fronts are still original at 103,000. I sometimes pull a two axle car trailer. Less than 5,000 miles of the total though.

The article shows if you have a BMW M5 then some form of premium is probably required. But it's basically a street legal race car at $130,000. Funny the F150 showed significant differences when fuel...

While premium is recommended in my torch red mid life crisis two seater it does just fine on an 87 octane 10% ethanol blend. What I find most impressive is that if I drive it without having to feel...

We were a couple hundred mile north of the totality path. Started looking weird/different. We had the approved glasses and sat outside and checked every few minutes at the progress. 2:01 PM Central...

Obviously regulations differ on this side of the big muddy. Steel hasn't been allowed here since 2008. Only fiberglass. I can't find the info on steel now but I think nothing can be in use any longer...

I never said bad gas can't happen. I said it's not likely to be a rusty tank issue and sediment stirred up during a tanker filling the tank. Maybe steel tanks are still common where you are.

I would suggest in most places and at least where I am you won't find a steel underground tank still in use at a gas station. Just last year a station completely redid their tanks and gas islands...

We will see what happens after the ruling and what happens to the numbers of incidents. While they should all be less severe, will the overall number go up, down or remain the same.
Time will...