I use MDF for templates and cut the parts within 1/2” or so on the table/band saw.
I’m curious about the application, are these hatch covers framed? 1/4” seems too thin for a hatch cover, unless...
Type: Posts; User: Larry E Stroud; Keyword(s):
I use MDF for templates and cut the parts within 1/2” or so on the table/band saw.
I’m curious about the application, are these hatch covers framed? 1/4” seems too thin for a hatch cover, unless...
Thanks again everyone, I placed the order with Toolnut. Total with shipping and tax came to 272, was hoping to get it for less but it’ll pay for itself in short order.
Great, thanks for the replies.
I’ll go ahead and give Toolnut a try..
No local stores that can order it unfortunately
I’ve been searching high and low for the 118 inch Makita saw track to no avail.
All I’m finding available is from suppliers with questionable reliability.
A forum search brought up an older thread...
I ended up returning the remote, will have the new one soon. I didn’t try any other devices on it, but I’m hoping the replacement does the trick.
Thanks for all the help.
Bruce yes, the DC works when plugged directly into the receptacle, thanks.
I have a Grizzly G0548ZP dust collector that I want to run on a remote switch. It’s not plumbed yet, so switched gates aren’t an option at this time.
I ordered a 220v Long Ranger III to control...
Have you tried Sturgis in Vero? They list Mahogany on their website.
If making a new arbor is not feasible, maybe the machine shop can repair the existing one? If the OEM tolerances are bad, allowing the bearing inner race to ruin the arbor, maybe the machine shop can...