The issue has been solved (fingers crossed, I have done that successfully 4 times) by removing the usb cable from the pc and inserting it again, then it connects to the laser.
Type: Posts; User: Stratos Gregoras; Keyword(s):
The issue has been solved (fingers crossed, I have done that successfully 4 times) by removing the usb cable from the pc and inserting it again, then it connects to the laser.
My laser has only a usb and a parallel port. A cheap print server device costs 62 euros here (the price of a top ssd 500gb disk). I found a very short usb B to A cable just now, so tomorrow I will...
Thank you for your time to write an answer. The installation procedure is done properly as you said, and I have tested 2 cables, what I plan to try is a shorter usb B to A cable, which I don't have...
I have a similar problem. Since it is not possible to use a cable shorter than 15ft/5m, do you think the problem would be solved if I buy a usb to ethernet adapter and connect my laser to the pc via...
GCC Spirit Si-25 usb on a W10 pc. After succesful installation, succesful test and shut down, there is a printing error message from windows 10. Then I have to repeat the whole...
You can also check if the lens (close to the engraved material) is well fixed. If the screws are loose it results in heavy banding.