Search:

No kidding, Haunted...I actually painted the hole inside the cone with some white paint, figured if it hit it it would burn....NOPE. But the thing is, doing a rastor image, great detail...no double...

When you were in school, did you ever use an outline?....ever use Bullet Points? It's pretty clear what I'm saying, and you know exactly what I'm saying, but you choose to be an ass about it..... I...

A sensei is a "Master" at something..... I've put in multiple lens's...all in the right direction, the right one's, and all tight....But here's the thing. If the lens was the problem I don't see how...

"50 watt Chinese laser"..... been fighting double line ghosting on cuts....Perfect alignment, New mirrors and lens....tried multiple lens's....today I ran a file (RDCAM)...with a scan and cut layer....

Thanks...I've bypassed the problem of the proximity switch....BUT INTERESTING, and this should make it easier to figure out....It burns nice and clear and defined on Scan.....but double image on...

I'm not sure what you want, it's totally clear on my page...I'm not writing like I'm talking to 10 year old's...figure most folks have the ability to extrapolate..... My professors always used me as...

Thank you, very useful information........ you are a Saint...

Thank you, very very helpful...

OK,here's a good one. For some time I've had to fire my pieces asclose to the left upper corner to not get ghosting.... It's aligneddead center, beam not hitting cone, everything clean.... then even...

Got it Fixed, hooked up the water and air assist on another circuit....and disconnected the internal light. Been working fine for 5 years, possibly the air or water pump are losing it and pulling...

HELP!!! I was in the middle of a Job and 50 watt blue and white chinese laser....First time.....quit firing, but still tracked....just no beam. No door switches on this one, Emergency power switch...

So last night I went to do another old file...it fires off to the right...Very consistently..the same amount of distance..and probably a good 10 mm's off to the side...So now what I've seen is that...

Curiouser and Curiouser.. This should be really a good one for the "Sherlocks " out there. .SO I decided to try an experiment. Since another problem I had a while ago was that old files that...

What does that mean?

ThanksYeah, it's not a material shifting issue, checked that first.... I'll look into mainboards...is there one that you feel is best?

It looks like I'm using MC-Board Mainboard.

I'll try messing around like that...been in a crunch for a while just needing to get things done. Another really weird thing it has done, just with some files is, it changes the size..it'll read out...

What is the expense for changing a mainboard, and what does it entail exactly..is it new software as well? I have RD CAM 2 ??? I think with laserworks software.

I agree, also have a 50 watt chinese that will cut 1/4 easily. Haven't had too many problems...(a voltage spike that took out everything in my house didn't help), but it was inexpensive, I got it...

Yeah, it's a major PAIN...If I have little tiny 20mm pieces, I have to do them one at a time...

322356I have a 50 watt Chinese laser. Not long ago we had a power spike, took out all our florescent lights and multi strips, blew the fuse in my laser and I ended up putting in a new tube and power...

600 dpi is what I use on all my files

So I have a 50 watt Chinese Laser that I'm pretty happy with. But I recently put in a new Power supply and tube..(YIKES, it didn't work half this good when new). And I do not know if this is...

320263320263


The first layer was a Raster, the Oval shape...it started firing on the right
Second layer was body, boobs, arms etc. also raster also fired from right.
The third layer was...

Yep.... on 3 layers, two are raster and one vector. Second and third layer...one raster and one vector, shift over. The farther from the start point, the bigger the distance of the shift. It isn't...