Get a piece of plastic drop ceiling grid. Cut to fit your laser and lay on top of the bed. The laser will cut into the plastic grid and won't flash back. You can get it at any big box store like...
Type: Posts; User: Scott Besaw; Keyword(s):
Get a piece of plastic drop ceiling grid. Cut to fit your laser and lay on top of the bed. The laser will cut into the plastic grid and won't flash back. You can get it at any big box store like...
count me in
count me in
count me in
I'm in, thanks
Thanks Joey, I'm in
Go to forum actions on the top of the page on the line right under the donate button. Go to general settings, scroll down to thread display options - use thread display mode and choose one of the...
The razor e-90 would be a good choice. My son has an older e-100 and my nephew recently received an e-90. The e-90 runs in the grass easy with a 100 lb. boy on it.
Count me in. Thanks US Router Tools
Try a heat gun. I would cut a form to bend around. Clamp one side and start heating while applying some force. Work your way up the strip. I have used this method for cedar strip kayaks and on a 5"...
The Byrd and Woodmaster are spiral heads. Definitely quieter than a head with three knives. They also produce small thin shavings that are easier to bag and throw away.
The cause of ridges is the inserts have grease under them. I did have to remove all of the inserts, clean and reinstall on both heads. The Woodmaster was worse then the Byrd before cleaning. I get...
I have a Byrd head in my 8" jointer and a Woodmaster in my 18" planer. They are very similar in appearance and performance. Byrd did not make a head for Woodmaster a couple years ago. I would not...
Thunder laser's HR head has a finer dot and will engrave pictures better than a 2" head. A 2" head is fine for lettering and general engraving until you get around 1/8" and under and then it depends...
The sale flyer states that the sale runs February 24 thru March 23. There are some exceptions -- Jet 3/3 thru 3/6, Rikon 3/10 thru 3/20, Sawstop 3/1 thru 4/30. The free gift for the Nova is a...
Thanks Tom, I didn't know that. I moved my house and added on, but it was not new construction. My brother-in-law built new 16 years ago and pulled all his permits and we built the house. Must of...
Hi Tom,
There are a lot of counties in Ohio that the homeowner can pull their own permits and do the work. I live in Portage county and pulled the permits for everything and did the work myself. I...
Thanks Chris. I did not know any of the hybrids had plastic tanks. The new A.O.Smith hybrids have anodes, so they must not be plastic. I will take your advice and look into everything you mentioned....
Hi Chris,
What do you think of your water heater now that you have had it for 2 1/2 years ? Has anyone else bought a hybrid water heater?
I'm in. New bits would be nice.
The washers are the problem,they are cup shaped spring washers.The washers you have are worn out or lost there spring.Fein sells a replacement set of screws with washers that are stronger and works...
count me in please
count me in,thanks
count me in,thanks
please count me in