Search:

Timely, I used to work with water levels and while they work it is cumbersome imho.

Because I am doing two additions at my house from bottom to top almost 100% alone I spend some money and got a...

Wow, they are not even trying.
But I hope the op can sort things out.

That might be a new favorite word of mine too and it gave me already a much needed smile.

Thank you Roger.

The only time I let them go all the way down is when I forget to charge them.
Normally I leave them plugged in overnight.

Also on red clay here and yes gravel disappears in there at a rate especially when wet you can almost watch it.
If you put road bond, not sure if it is used for railroads also but it is a base for...

This, I do not know how many times.

Looks like #178 September 2007.

My version of an out feed table.
https://sawmillcreek.org/attachment.php?attachmentid=427041&d=1582979550

Guess my searching skills are not as good as I thought.
Thank you very much.

Hello,

I bought a CMT333 without drill bits and I need 1/8” (3mm)
drill bits for the wood screws for the blum 38h hinges I am planning to use.
The ones CMT offers and are mentioned in manual...

To finish this up here are the pics of the fix.
https://sawmillcreek.org/attachment.php?attachmentid=426051&d=1581876178
https://sawmillcreek.org/attachment.php?attachmentid=426050&d=1581876159...

That is what I do too.

https://www.lowes.com/pd/SHUR-LINE-Edger-Classic/50369770

No, I was thinking about that but since all I tried did not do anything as some members here correctly predicted tearing out the effected strips is the next step.

That is what I was thinking but according to the wood whisperer for setting up a jointer a level does not offer the needed accuracy.

Both pics are taken after being treated with 10% hydrogen peroxide for a few days with no real effect on the stains.
The floor boards will be removed now.
...

Thanks guys, I just wonder if a 36-40” is long enough to set up a
jointer.

Reviving an old post since I am in the market for one.

Did the recommendations for the ones in the posts changed
and are there new options to consider?

Thank you.

That is what I needed to hear, thank you.

Looks great, did you build the countertops and what are you doing for makeup air?

Thank you.

I started looking into that since I now have an old delta and while you can still get the risers they are very expensive.
Using riser blocks and modify them like posted above seems to be a route a...

@Tom M King, yeah and I would have left it after what you and others said here but it was worth a try to my customer
and after I will have tried oxalic acid I will seal it up no matter what with...

Yes, the finish is sanded off.

I have the same and I really like it.

https://sawmillcreek.org/attachment.php?attachmentid=423716&d=1579039671

https://sawmillcreek.org/attachment.php?attachmentid=423717&d=1579039690

No real change after two days with Barkeepers...