Search:

Most used is my DX60. Very comfortable and weighty in the hand gives me alot of control

If your not stick welding 100% cotten or denim are fine. Definitely boots a hot spark will go right though sneakers and socks(doesn't feel great) Mig/tig put off a lot of uv but not a lot of sparks...

Ballast. I have put together a few wooden file cabinets that have steel plate in the back.

I would buy an inhibiter If it risks freezing(garage?) get 30-40% propylene glycol with inhibitor premixed. What is your volume of liquid? 5 gal bucket with the pump that came with spindle?

Im...

If your worried about getting too close to the top you dont have to fully sink the channel. as long as the the flanges and part of the web are sunk. I would stick to steel it has a lot less flex. I...

If it is a wood working bench I would think you would not want epoxy. I have used them in other shops as non-woodworking benches and they are super durable but not what you want for hand tool work.

I was at the NY knife show saturday and you definitely have to have a budget for this. Some of the customs there were 3-4k. I have a friend who makes custom so I have one of his but I wouldnt...

Bondo it first, you'll still know its osb otherwise :rolleyes:

Ouch, you got lucky.

I read at some point here that the DC hooked up helps keep line clear and the planer has less work to do, when the line clogs and the blower is pushing against it it strains the motor. Im not sure if...

Can you take the garage off the 22 and put it on the 26?

Jim Ive been emptying them as to not deal with that question. When my DC is full I mask up and dump the UDD into the DC bin and through it...

I think its important to have good bits either way. It took me a long time to realize I can throw them away when they are even a little worn. Phillips is a fact of life when it comes to many...

Thank you. I like to suffer longer than needed, but the finger method does kind of work. I probably should have looked this up sooner

aluminum tape can be used to ground your line. The alternative would be to connect a 12 gauge stranded wire to the wire in the 4" flex if you go down that path and run it to a building ground. I made...

Ive read this can kill the life of the planer.

I would setup a 2 stage system. You can use your shop vac to pull but I would look into running 4" to the bucket and use your 2-1/2" shop vac to pull

Glenn
Dont they come with that tool? I wasnt able to figure out how to use it, I just use my fingers

Jim they are not always powered by the condenser. That is different amongst all the systems.

Lee they are called VRF or Variable refrigerant flow. And are a waste of money IMHO for residential use...

Probably just mylar party balloons. Real question is why cant our trains stay on the tracks?

If you do it quickly and are gone before next tax season you should be fine

I remember reading last year that if you are selling your property and have receipts it will not be taxable. The problem...

Perhaps Rubios 5% smoke might work better

https://www.amazon.com/gp/product/B08KHW4S5R/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I like this one

A planer sled is a way to run a board through a planer without a jointer to make 1 side flat to start.

Jointer sled is to get 1 edge flat. Building it with tracks will allow you to use it as a...

I too like the grex but its 2x the price. having 2" option is nice.

I remember watching NYW with my dad. I wish more non-drama woodworking (or any hobby for that matter) shows were available on tv. Its hard to learn from any of the new shows thats probably why...

You are looking for a jointer sled
https://www.youtube.com/watch?v=otnHklOdwtk