Search:

when you tighten two nuts together to “jamb” them, the hex’s will not line up. This makes it a PITA, if not impossible to get a box end wrench on.

I was considering a verying terrain and didnt want to cut myself short. The application is for leveling two 8’ extended fences for my miter saw.

Having to go another route here. Upon closer inspection of the pulleys, the idler pulley bearing shoulders are heavily distorted, and the drive pulley is damaged on the OD, and since i cant get...

Right, as I stated above, this is definitely an option. Although a quick search online doesnt seem to reveal much for 10mm mild steel shaft, everything is heat treated tool steel or case hardened....

super, I will call today

excellent info, thank you. Worst case is, I buy a 10 mm shaft.

Both shaft and bearing are .500”

I picked up a vintage craftsman ( canadian Simpson-Sears LTD) model 103-22540. No parts available from sears and no replacement part number for bearings. The existing bearings on the idler pulley...

I needed 8 leg levelers for my miter saw stand/fence system. The problem with most levelers, they require an open end wrench to adjust, and its usually a very thin nut your trying to get the wrench...

I got my new Trend Air/Pro a couple of weeks ago. I think its a really great piece of equipment, but has room for improvement. During the purchase process, I was debating on weather to spend the...