My Makita runs on 2 18 volt batteries so 36 volts.
Type: Posts; User: Gordon Stump; Keyword(s):
My Makita runs on 2 18 volt batteries so 36 volts.
I do not like it when responders do not answer the question. But I am doing it myself. I really like my Makita 7 1/4" cordless circular saw. Performs like a corded saw!
Yes................. :)
My rule for the tenon/moritse is 1/3+ the thickness for the tenon.
I use Arm-r- seal on walnut. In my low humidity drying cabinet after max 12 hours I sand the first coat with 320 G and apply the second and final coat. I do not know what they mean by a sealed...
I am the opposite. I hate clutter and scraps. But I love fire. So I burn some very nice walnut when I run out kindling. I even burned any live edge from the mill years ago. My son kept bugging...
I use Cincinnati Dowel for larger quantities. For smaller quantities Midwest Dowel. Same company. Good quality.
Thanks to Warren Lake I lowered the guard and attached a board on the bottom. I think I will make a C channel that goes around the belt from the front. Like Mr. Cutler said.....just because it...
514988
Edge sander:
Sanding and breaking the edges on the walnut cleats in the picture hurt me more than once. I used gloves today and it went well. Another good application for gloves is the...
Dear Mr. Duren, Thank you for your thoughtful comment. Very truly yours, Gordon Stump
514731
You are right Warren. I got in to far on the top belt twice in the last 30 years. Not too bad but the cuts were fairly deep and takes a long time to heal. The stroke sander is a kit. It...
My original post stated I was considering using gloves on the stroke sander and edge sander. Then I asked if anyone had experience using gloves in the woodworking shop. That was the wrong guery and...
"Cut proof" your words.
As I get older I find my ability to stay on focus needs conscious focus. I would not wear cut resistant gloves for spinning blades but am considering them for the stroke sander and edge sander. ...
I used to go. There was a small fee to enter. Then when they moved to the Novi Expo center outside Detroit they also charged for parking. That is when the grouchy old man in me began to flourish ....
I make the tenon 1/3 the thickness of the board.
Thank you for your concern and Merry Christmas.
512554 512556
The metal cabinet was high quality for $130 and the fan and heater $21 respectively.
No more giving swambo a hard time when she roots around in the basement or plays ball with...
I am not a cheerleader for my craftsman RAS. But I have the room and with my extended tables and a thin kerf Industrial blade it will cut 6/4 rough boards. I am 78 and getting a 12 foot 6/4...
My little wife and I moved an 8" joiner. I bolted a manual boat winch to the front of the flat bed. Covered the ramps with plywood. Took off the handle on the winch and used a cordless drill to...
re-posted from finishing forum
Drying cabinet with smart heater
I currently bring my small products upstairs to a heated utility room with ventilation. But recently climbing...
moved to workshop forum
My first thought was the cnc machine I call Paul after the movie (don't ask). But I always tease my wife when she says she has to cook dinner. I say.....oh push buttons on the microwave? So the...
I cut a hole in the workbench and screwed a big gulp from the bottom. The dust shield directs "most" of the chips down and out the 510111dust collector
Yup, smack it. The magnetic switch on my planer does that. I need to repair/replace the magnetic switch since this type of thing is very dangerous.