Search:

Type: Posts; User: Lee Schierer; Keyword(s):

Page 1 of 20 1 2 3 4

Search: Search took 2.02 seconds.

  1. Replies
    28
    Views
    783

    How high is your blade raised when it makes the...

    How high is your blade raised when it makes the noise? Is the arbor flange hitting the underside of your insert?
  2. Replies
    18
    Views
    559

    Are you sure your new blade is the correct...

    Are you sure your new blade is the correct length? If the blade is too long the upper wheel can hit the shroud when you tilt the upper wheel. The tilt adjustment on the upper wheel is supposed to be...
  3. That is a really nice project. I especially like...

    That is a really nice project. I especially like the matched grain on the drawer fronts and book matched doors. I'm sure your wife will like it, but it might cost you as she fills it up with new...
  4. You can also use a couple of old coat hangers...

    You can also use a couple of old coat hangers bent in a "L" shape. I have some that a phone technician left on our property that are made from heavy gauge copper that work really well. Hold them in...
  5. Replies
    2
    Views
    226

    That happens in Threaded view for some reason. I...

    That happens in Threaded view for some reason. I would suggest that you might want to try the Linear view setting. Go into your settings at the upper right of the page and then into general...
  6. I have the Bosch and I love it. I've had zero...

    I have the Bosch and I love it. I've had zero problems with it and it accepts a lot of different brand blades. It has plenty of power and variable speed.
  7. You can make nice raised panels on your table...

    You can make nice raised panels on your table saw. I've made sliding doors for our closets, kitchen pantry cabinet and other cabinets with raised panels that were made on my table saw.
    ...
  8. As noted above, if the cost is right and it is...

    As noted above, if the cost is right and it is bug free, it should be good lumber. I would advise getting a moisture meter and checking it before making any projects from it.
  9. Replies
    12
    Views
    596

    The idea is that the "wedge" is pulling the tenon...

    The idea is that the "wedge" is pulling the tenon through the mortise, so you never want the wedge to hit the part of the hole that is still inside the mortise so the joint stays tight.
  10. I would suspect the guard is polycarbonate. You...

    I would suspect the guard is polycarbonate. You can use methylene chloride solution to bond two pieces of Lexan polycarbonate together. Methylene chloride is a solvent that softens Lexan enough that...
  11. Thread: Wood ID?

    by Lee Schierer
    Replies
    6
    Views
    310

    Looks like maple.

    Looks like maple.
  12. Replies
    15
    Views
    665

    In my opinion you shouldn't have to worry about...

    In my opinion you shouldn't have to worry about wood movement in any of those joints, if the wood is properly dried to start with, that is 7-8% moisture. None of your pieces are wide enough for...
  13. Replies
    5
    Views
    305

    The piece pulling away from your fence after the...

    The piece pulling away from your fence after the cut is an indication that your table and fence is not aligned with the blade. If you have never aligned your table and fence to the blade you won't...
  14. If we align the table on our table saws to the...

    If we align the table on our table saws to the blade, why wouldn't we do the same thing on a new band saw?

    I thought my saw needed more power as it seemed to stall when making maximum height cuts,...
  15. Replies
    11
    Views
    827

    I moved the thread to the moderator forum. I get...

    I moved the thread to the moderator forum. I get an alert just trying to open the thread.
  16. One reason for wood faces is they protect your...

    One reason for wood faces is they protect your blade if you happen to get the fence too close to the blade. I made a fence cover for my Beismeyer fence 440734440735
    The cover allows me to attache...
  17. I only have two. They get used in frequently.

    I only have two. They get used in frequently.
  18. Replies
    39
    Views
    2,000

    I use a card scraper. I was amazed at how easy...

    I use a card scraper. I was amazed at how easy it was to set the burr using light pressure.
  19. I had the same issues with my Delta 14" saw,...

    I had the same issues with my Delta 14" saw, until I aligned my table to the blade. Here is an excellent video that shows how to align the table to the blade. Once I did the table alignment I can...
  20. Here's one way to do it....

    Here's one way to do it.
  21. I have one that was working, but it was a pain to...

    I have one that was working, but it was a pain to wind every day. Most cuckoo clock works are pretty primitive as compared to most clocks. They are also relatively bullet proof. Before your try...
  22. Thread: Wood ID?

    by Lee Schierer
    Replies
    4
    Views
    176

    Birch plywood was commonly used for cabinets in...

    Birch plywood was commonly used for cabinets in the 50's. The louvers were probably pine. Shellac was a common finish for both items.
  23. Maybe there is something to learn. The utility...

    Maybe there is something to learn. The utility pole in front of our house was several years old when we moved in 1977! It is still the same pole. That's at least 43 years. How many fence posts last...
  24. Replies
    1
    Views
    161

    Here is what the manual says changing the Blade...

    Here is what the manual says
    changing the Blade
    NoTe:
    Clean blade of a
    ny excess oil before installation.
    1. Slide the saw assembly back to its farest position. This is
    the position in which...
  25. Replies
    18
    Views
    1,259

    When it was new my pvc pipes for my DC had a...

    When it was new my pvc pipes for my DC had a pretty strong static charge. As they accumulated dust inside a a light coating on the outside they no longer have any detectable charge.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4