OK! NEW ISSUE. Just by chance fooling around I plugged the USB cord into the UDisk Port, guess what, the panel came on, I can not send anything over, it says communication error, I can not run...
Type: Posts; User: Katie m Pierce; Keyword(s):
OK! NEW ISSUE. Just by chance fooling around I plugged the USB cord into the UDisk Port, guess what, the panel came on, I can not send anything over, it says communication error, I can not run...
Ok, so I tested the laser, it still fires. Can not bypass the panel it says communication error, all lights and fans work too. Seems to be just the LCD Panel. Any thoughts, probably just have to...
I checked the fuses inside the power supply plug, are there other fuses to check?
I was in the middle of a job when the laser stopped, the control panel went off. When turned on, the red and yellow light come on the Laser Power supply, the lights still works and the fan still...
when I laser engraved my cookies I thought they tasted funny :) loving this thread though. Im not the only one that has tried food :)
I was in the middle of a job, all of a sudden the Control panel went blank and the laser stopped. The light still works, the fan still works, no power to the control panel, when I looked at the laser...
One last thing, on a different topic. And as an update, I fixed the Wire, next water chiller went out. Waiting on a pump to fix that, mean time using an aquarium pump, then I had bubbles! Agh. Got...
I checked the water flow, the fan comes on but there doesn't seem to be a flow of water when I tested it with the small tube to the in/out. Maybe the pump? It's not connected to the laser except the...
I did not refill it or anything , it was working then it just wasn't . I went through and looked at all the line but can't see anything unusual. I haven't spilled water or anything. Strange. If...
The cw3000 water chiller for my laser stopped working suddenly. I was fixing the hv wire, got everything working beautifully and as I'm running my 4th test I get error message for water chiller. I...
Well, I reconnected the hv wire to the positive side of the tube, I stopped arcing and worked better than ever for a few minutes except the light still didn't come on. Now the water chiller isn't...
Thank you for your help. I replaced the red wire. I met this really wonderful pro that sold me the wire with the silicone casing and I learned a lot. I even got to tour his workshop which was...
Pictures
https://photos.app.goo.gl/J7RAVPUTGiVzTaYg1
Update, I took off all insulation to see if the wire is shot. I am attaching the image . There is definitely a break in the wire, help! What do I do from here? How did I fix this wire?
alright, so I bought some high voltage tape, now after reading all of this I am going to try what was suggested here, my question is, is the wire fried? The tube is no longer working, when I hit...
https://photos.app.goo.gl/f56jwMGmVz7bNFSy2
Hi, thanks for your reply. I can see a spark coming from the wire , my friend bought the 80w and I got the 100w, there is a difference in the size of the tubes. What output should I be running it at?...
Hello,
I have worked with full spectrum lasers but just bought a new chinese 100w laser. It has been working ok for a few weeks. Suddenly started hearing a popping sound, thought it was the beam...