Search:

What would be a fair price for dry, stickered rough cut 4/4 birch and black ash? Thanks, Rick

I am interested in trying to sharpen freehand like the recent article in FWW described. (July/Aug issue) The author recommends using a 6" bench grinder because the smaller the wheel, the deeper...

David, do you drive over the 3" angle iron? Would it be possible to post a picture?

Thanks, Rick

I am heating my garage shop in northern Minn with a LP Hotdawg heater. I need to seal the air spaces below the garage door.

The concrete has multiple cracks and has heaved in the middle of the...

Please excuse my ignorance, but how do you cut such a big dado in a 4x4 post as shown in Brad's pictures?

Thanks, Rick

Wow, that looks great, Brad! Thanks for taking the time to send the pictures. It's a big help and I'll try to emulate your quality work.

Rick

I have an old ping pong table top in two sections, but the metal base pieces are long gone. I'm thinking of building a base and it doesn't have to be real portable.

Just wondering if anyone has...

[quote=Will Blick;736611]OK, I found the data on the 3m dust cartridges
The filter is tested at 99.97% of airborne particles 0.3 micrometers (µm) in diameter.

This is pretty impressive IMO...
...

David Charlesworth teaches that the only two stones you need are either an 800 or 1000 and a 8000. He says you don't need a size in the middle-just a waste of time and effort. Christopher Schwarz...

Opps, I guess my Paypal contribution I made last night has not come through yet.

Hello from cold, windy northern Minn.

Rick

I have a bunchof white pine trim that I'm going to be installing. It has 3 coats of polyurethane thinned with MS that I've wiped on. I'm thinking about putting another coat of half BLO and half...

Follow up questions: Are the No. 100 bits different than the Russell Jennings without a number series?

Are the Russell Jennings bits manufactured by Stanley after they bought RJ still good...

Are the Russell Jennings No. 100 auger bits fine or coarse thread? Or can they be either?

Thanks, Rick

Good point, Michael and I don't mind the other questions that have been raised. They certainly apply.

Thanks everyone for the responses so far!

Rick

I'm considering buying the WS3000 for sharpening chisels and plane blades and am wondering how current users like the system. Seems easier than a grinder and all the stones. Any disadvantages? ...

My shop is north of Duluth and in a 2 1/2 gar garage insulated OK. There is 4" of fiberglass in the walls and 6" in the ceiling. I did caulk well all around the windows, doors, cracks, etc.

I...

I placed my order for the Incra LS 25 super system and the Dremel engraving tool last night. Total cost was $227.04. What a deal! Thanks for calling this to our attention.

Rick

I’m finally getting around to putting up all the window and door trim in our cabin/house. It is semi-rustic with a lot of 25 year old pine & fir aged to a honey color on all the ceilings and floors....

Just ordered my copy on Amazon. Thanks for notifying us. I'm looking forward to reading it since I have a new BS that needs assembly.

Rick

Thanks for bringing this to our attention, Jim. I don't normally follow the Design Forum.

Rick

Mike, I'm a tree hugger so I try to cancel catalogs I don't want. A quick call to customer service almost always gets you off their mailing list. Just a thought.

Rick

Tim, I built a fence similar to this link that has worked well for me. It is about 8" high.

http://home.earthlink.net/~us71na/fence.html

I hope this helps. Rick

I would second everything Ken said about the LV medium shoulder plane. Rick

I also have the Penn State guard mounted from the ceiling. Works great for me. I did cut and mount a 4" opening to my DC.

Rick