Search:

I got rid of Grizz separates a few years ago to purchase an A3-41 due to space challenges...And now that I have more space I would make the same choice.

Steven,
I was considering the SC4 and a S315 several years ago just as you are. I went with the S315. In my case the reasons were as follows:
1. longer stroke for ripping a full 8' sheet with...

Sliding table saws have been around. You are correct in that you will no longer need to build and use a cross cut sled. When using the sliding table saw your hands are not near the blade so that you...

Mike there are quite a few threads on the forum regarding small format slider table saws. Grizzly and Hammer both offer several options. Ironically there is a used Hammer C331 combination machine in...

Paging Mr. Loza to the blue courtesy phone.

I used a 5' Grizzly G0623X within a two car garage. I was cutting maybe a 80/20 percentage of hardwoods to sheet goods. The saw was not big enough to breakdown a sheet of plywood. As I began to work...

Thanks everyone. Rangate rocks!

Thank you David for the sources. I had only checked Oella's website. Rod I did not know if boring was an option. I wonder if the additional cost will make another option more cost effective. The...

Is there an 1-1/4" bore variant of the 220mm (or imperial equivalent) rebate cutter? I am considering a set of larger rebate heads for my shaper. I have seen the Felder offering, and I like them, but...

I purchased a MM S315 last year and I too am very pleased with the purchase and would do it all over again in a heartbeat.

Just installed a RPC Q4 of last year. A 3 phase service was not an option where I am located. Not a great deal of usage yet but it has not been an issue to know I need to start another piece of...

Chris I am sorry to hear about your experience. I have two Felder/Hammer tools only one was purchased new and my experiences could not be more opposite than yours. They have bent over backwards for...

+1 on the peanut butter baited traps.

It aint over until the fat lady sings. Those two red zones stands will be the topic of all the arm chair quarterbacks tomorrow. What a great game. Hats off to Capers for a great defensive game plan....

I purchased one of the newer ones last year no problems with the scoring system or any other part of the saw for that fact.

ROFLMAO
Thanks Phil. The chimney just had to suffer. Santa totally outdid herself!

I was a really good boy this year.

302790

No shop time this weekend. Unfortunately spent most of Thursday, Friday and Saturday feeding the generator, chain sawing fallen trees and limbs as a result of our big wind storm last week. Happy to...

Good morning all,
Well Santa came a little early this year. I spent a good portion of the morning Saturday mounting and installing a 15 HP RPC. Upgraded my PM2700 to a new to me Felder F900. Spent...

My woodworking this weekend mostly consisted of chain sawing the tree that fell across my driveway, taking out our power. The Friday night snow storm that came through my area left a lot of ice...

Dave after looking at your pics I had to go out to the shop and look at my machine to see if it was the same. At first glance mine appears different. I took a peek inside the cabinet and can see what...

Thanks for the input. That is exactly the plan if the wheels mount from underneath. I think a johnson bar and some blocking should do the trick.

Hi Dave and thanks for chiming in. This is my first Felder machine experience so I have no previous familiarity to compare to. The base of the 900 is predrilled. I did not see any leveling pads on...

Just took possession of a Felder F900 shaper and I would like to take advantage of the Felder 10% sale this weekend to purchase the mobility kit for it. I cannot find any installation information on...

Just curious if anyone here owns a Aigner distometer and their thoughts on its value to their workflow.

soory inadvertently posted this in the wrong section. Please move to general section.