Search:

Unless you post your property and create a physical barrier, local law enforcement will do nothing. The level of the offense is at best a misdemeanor which would get a slap on the wrist and a...

The bearing behind the blade is adjustable, simply readjust it after you move the guide. It should only touch as you press a piece of wood into the blade to make a cut.

As long as your blade is...

As you said it got political among other problems.

The good news is the two long pieces can be reworked to make the short sides and you only need new material for the long front and back. You also have two short pieces for another project or for...

First off, since you are in Alaska and there are earthquakes there I would suggest that you tie the shelves to the wall.

we used to lots of canning, but have tapered off now. I built the shelves...

When I align my older Craftsman cast iron table saw, I align the blade to the left miter slot. Then I align the fence to the same miter slot with the dial indicator mounted on my miter gauge. I...

You probably also gave him a ball peen hammer to drive them with.:D

My SIL was the same way. One year he came to our house for Christmas and he needed a gift our daughter (his wife). He wanted to make something. We went out in the shop with just a few days before...

Most windows computers have a snip app that lets you make a jpg of anything displayed on the screen.

Very nice an Heirloom for sure. The top is really a nice piece of wood.

Here is a link to the specifications for a Galaxy Z Flip2 5Gb

I casually looked at one a while back at the AT&T store and wondered how long before the folding screen fails.

The Freud Glueline rip blade has flat top teeth and TCG and is reasonably priced. Half of the teeth are flat top half are TCG. It gives a nice flat bottom kerf and a smooth sidewall cut.
481561

Make a filler out of maple that will fit in the wide kerf. Glue that filler in place and make your new cut once the glue cures completely.

You are listed as a Member, if this is not correct, please contact Keith Outten.

Only contributors can send personal messages through the system. Becoming a contributor costs a minimum of $6...

Really nice job. I like the color and the nice finish.

All have been deleted without opening them......

The donate button does show up in full site mode on tablets and phones.

I converted a closet into a pantry for my wife. I used full extension soft close slides rated for 100 pounds.
481348481346 481347
The shelves are made with poplar frame, red oak front panel and...

Just be sure to apply your glue to both sides of the joint.

You need to make or buy a clamping set up like this. You don't need to fill in all four pieces, you can glue up just two at a time,...

Nothing other than size and it is up in a tree.

I had suggested a cloth covering but it was rejected.

Just a note those soft fiber bulletin boards start to fail if you place too many tacks or push pins in the same area.

For the past week we've been receiving supposed emails from McAfee saying our subscription is about to expire. Sometimes we get two or three per day. Today we started getting the same bogus notices...

I'm running Firefox 101.0.1 on windows 11 with no issues.

I was asked to make a couple of bulletin boards to go on the back of some doors in the church welcome center. The deign called for two 18 x 24 framed cork boards. I was able to order the 3/8" x 24"...

That is a nice set up and the price is good. Be careful measuring from the sides of the teeth, because most are have a relief grind on the sides which can lead to errors.

Switch you gauge to the...