Where do you get lifting straps? I use chains on the machines and they are great as you can lock on any place and adjust lengths and more. Only negative is the weight of a number of 3/8" chains. ...
Type: Posts; User: Warren Lake; Keyword(s):
Where do you get lifting straps? I use chains on the machines and they are great as you can lock on any place and adjust lengths and more. Only negative is the weight of a number of 3/8" chains. ...
still on cord and at times its annoying. Think I read a review of a Milwuakee blower and some unhappy users but will check it again. I learned to detail cars in LA and we used leaf blowers to dry...
Dont know the sander but can you not use large angle iron. Im pretty sure on my progress machine 6" wide belt the fence is a huge chunk of angle iron
for 400.00 to 1,000.00 you can buy a used cabinet saw. You can add a few jigs made from scrap and probably have a better saw than most shown here. You are limited by these smaller saws where the...
putting ply down works great, its no different than a zero clearance insert and maybe better.
drop a sheet of quarter inch ply with a stop block front and back on the table saw. Turn your blade up through it and thin rips are fine.
think its called an Orbit what they do for your eyes. have been in the tube a few times
20 x 20 box fan in a window.
So 3M ambient air blower there. Quality product one sales guy told me they were overbuilt. Hoods stink compared to Sata but all up to the hood really good good...
https://www.youtube.com/watch?v=7VN6qwqXVVI
I have one General 350 no wings. I agree with that as well. I cant stand all those light saws. Last used a ridgid whatever full size thing at a job site. It worked and even surprised me. Cant say...
George sounds like their is a poltergeist in your room or your family might be trying to kill you and collect the insurance.
the craft is one thing. Finding machines takes time and ongoing another. Moving is a whole other adventure and its a moving target at times and you have to adapt. Its not consistent. I upped to my...
done tons of work with routers not had issues with them. Snapped some bits pushing too hard, operator error.
I have some fairly heavy duty rollers and stuff moves easily on them. The only neg is they have to be aligned perfectly with your travel or your material will walk. Ive had this at times on the...
and I thought id catch hell for doing walk abouts on my bandsaw table :)
have seen Norton, Have seen Bell and sent it to them. Calls from Amazon and Rev Can and and. each time nice name and sounding like Peter Sellers in the Party. Had emails from two friends that I...
I liked how it was and is again as you have some number of other you tubes on the screen same time, six or seven from memory.
This was a ceiling done to stop sound transmission. It worked very well. Number of layers of drywall with roxul compressed between with acoustic sealant on all the edges of the drywall.
518484
Had a recording studio when young, you can take it as far as you want, floating concrete floors on springs Separate 2 x 6 walls on each slab that dont touch. I was on a budget used a ton of...
walked on one of the bandsaw tables many times to reach up to get things on the wall. Have to stop doing that and will.
so we really do have the power to change the world.
looks like the switched it back.
I cant work in shorts in the shop or landscape, get beat up. Kneeling at times as well.
when we get real craftspeople, what a great metal fabricator.
https://www.youtube.com/watch?v=x0WfVTmGHrU&t=29s
https://www.youtube.com/watch?v=i0vpiAhhGh8&t=111s
any new router is a smooth machine compared to ones that have worked hard. My Makita plunge 3Hp started out tight and became a rattle trap. Not the routers fault just the operator. I wont put the...