Search:

its no big deal either way,,i was just asking a question and thought someone might know the answer,,

could someone tell me why on a benchtop jointer there is no knob to adjust the height of the out feed table like it is on the infeed table,,i know the larger floor models has this feature,,,it seems...

i just checked it and it seems to be locked in place,,,,i have tried everything ,,,even trying a different blade,,,but reguardless when you get a solid green light on the panel and turn it on it...

the green light is blinking quickly and yes i lower the blade to reset the arbor

im hoping someone can help me,,i activated the brake on my contractor saw stop yesterday and today i put the new brake cartridge on and set it up exactly the way saw stop tell you too using the...

earlier i was on here asking advice on jointers and all of the answers was great,,,since then i found a used jet and i called about it and he said it did run and he would even show how good it is on...

i have been going back and forth trying my best to decide on a jointer,,,i would actually perfer to have a floor model and the 8 inch type,,but needless to say price is way up there,,if you compare...

Most of the bench top jointers has 4 adjustment screws on the beds...and I know the reasoning for this..and I have also noticed the full size jointers do not have this...I'm scratching my head...what...

I seen this desk today and it's really small.
It's about 22inches tall and about 14inches wide...I have never seen one this small..can anyone give me some info on it..

i am seriously considering getting a benchtop jointer,,,actually i had rather have the full size with spiral cutterhead but needless to say they are so much more expensive,,,,and reguardless if it is...

does anyone know where i can get the plans for a piano cutting board,,

can anyone tell me of a place to get a good budget friendly electric branding iron,,,,,i just want to brand a few things i make,,,i noticed amazon sells them and so does rockler,,,and i do know some...

no it wasnt and i was watching a you tube video,,steve ramsey at wwmm and he said a riving should be on the saw,,it does help,,

im actaully ashamed to say this,,but i was trying to square up a 8 in block of wood about 2 in thick and on the second cut i got some kickback,,,lol,,firt time i ever got it and it was scary,,and it...

i got the contractor saw,,,

i just recently bought me a saw stop contractor saw and its a great saw,,,the saw blade amazed me,,,it cut so very smooth,,as a rule i have always heard that the saw blades that come with a saw when...

i just noticed that the blade has alot of wobble in it even when tension is put on it,,could there be a defect in the blade

Well I broke down and bought me a new grizzly g0555..I went and bought a new blade from amazon...it was a Olsen 93.5x3/8x4tpi....I believe I got all the guides and bearings set right but this is the...

John I made this today and it worked like a charm...thank you so much for your help and input

I'm trying to glue up a cross member that is cut on a 45 degree angle...can anyone post a picture or tell me how to make a jig for this

i have a porter cable 12 1/2 planer which does a good job but i am wanting to upgrade to a better one,,i was thinking about the g0815 grizzly planer,,,some of my concerns are its a 3 knife system and...

could anyone help me,,i bought the plans to the woodsmith 4x36 belt sander that is used with your drill press,,,i have followed the plans to the letter,,and still cant get it to operate,,i even...

i have had the porter cable 12/1/2 inch planer for a few years now and it really does do a good job,,i dont think they make them anymore but i was thinking about upgrading to a 15 inch with helical...

that is really a great outfeed table frank,,,but i have the contractor saw where the motor sticks out on the back

has anyone made a outfeed table for saw stop contractors saw