1 Attachment(s)
Diamond Dresser for the Bench Grinder
I made up a few diamond dresser for the bench grinder. It is a metalworking project, but both woodworkers and metalworkers need a good dressing tool for the grinder. The first one I made was actually a present for my brother in law who is an avid woodworker.
Attachment 382117
I made a video of the entire build as well if you are interested:
https://www.youtube.com/watch?v=5mIXjcelBVQ
Direct Youtube link:
https://www.youtube.com/watch?v=5mIXjcelBVQ
There is a full set of drawings on my blog if you would like to make one yourself: https://www.thecogwheel.net
1 Attachment(s)
single point diamond dressing tool
Quote:
Originally Posted by
Dick Strauss
JKJ, I think you got one of Don Geiger's Try N Dress units.
Could be. But it's not the same shape as the picture I found of the Tru N Dress. Perhaps an different It has a different angled guide on each side to fit various sized tool platforms. I took photos just now:
Attachment 420777
I was at John C Campbell when somoene showed on - I thought he machined it himself. Can't remember if I bought mine from him or elsewhere - it's been too long! It does work extremely well.
JKJ