-
7 Attachment(s)
Tap & Die Box
Made from 1/2" thick Poplar...
Attachment 442051
Through dovetails on the corners of the box...
Attachment 442052
Lid has mitered corners, where the edges of the blank for the lid was folded down, and glued in place
Attachment 442053
Hobby Lobby supplied the hardware...had a nice stash saved up...
Attachment 442054
Lid is held open with a length of chain...
Attachment 442055
Inside you will find a few "racks" for taps and dies, with room to expand as needed..
Attachment 442056
Just a box...
Attachment 442057
12-1/2" by 7-1/2" by 7" tall...
Thanks for looking in..:D
-
Currently working on a smaller box...to house a set of pipe thread taps, and a die.....may post that here as a separate "Project"....
-
What a great home for those tools.