-
Sharpening stones
Fairly new to carving. The slip stones I have are the Chris Pye set and a water stone set.
My problem is neither one will work on my #8/10 or higher gouge. The Pye stones aren’t curved enough and the slip stones are too wide for a 10mm wide.
Looking for a source for narrower slip stones. Or will rod type stones work?
-
I don't use slip stones, rather a unit as described:
https://sawmillcreek.org/showthread....tool-sharpener
Regarding your question, if you can't find the shape of slip stone you need, you can use dowel pins wrapped with fine sand-paper/emery-cloth shaped to suit.
-
I am also curious if anyone has had any luck using the DMT Diamond Wave for this sort of thing.
I am also thinking that I could carve one to the correct size and then use diamond spray, diamond paste, or stropping compound.