Printable View
I want to set up dust/chip collection for my mortiser. What I need is something that allows me to position a vacuum nozzle close to where the mortise is being cut. I envision a fitting that can be raised/lowered/swiveled that takes a vacuum hose on one side and a nozzle on the other. Although I could make my own with a combination of 3D printing and wood, someone must make something like this. I’ve tried Rockler/Woodcraft/etc with no luck. Anyone know of something like this?
The former may work, the latter you can build.
https://www.rockler.com/dust-port-fo...caAr4eEALw_wcB
https://www.google.com/search?q=dril...t:hg&oshop=apv
I use this from Amazon: Loc-Line 80813 Shop Vacuum Kit, 2.5", Blue/Orange https://www.amazon.com/dp/B01LYEMPY1...8MQ5YJ5V9P83J3
this looks pretty good. i still have to make a stand/holder but it could be much simplerQuote:
Originally Posted by Bob McBreen
I use this as well. If you have access to a 3D printer (or know someone who does) there is a guy who designed a few tool mounts.Quote:
Originally Posted by Jim Barstow
https://www.printables.com/model/181...loc-line-25-va
https://www.printables.com/model/181...rodshaft-for-l
I used the Loc-Line on my PM719T
https://www.youtube.com/watch?v=jIJWNBAUtyk
+1 for my drill press; coupled to the DC w/ Rockler 4" x 2-1/2" adapter. Caveat for Mr. Barstow: the Loc-Line will stay where you put it, but it is not as flexible as you might think. I used all the 'links' in the kit in a single run to provide ample reach and flexibility.Quote:
Originally Posted by ChrisA Edwards