Martin OM Style Acoustic Guitar
Here we go...
I'm using plans from LMI. The guitar is based on Martin's OM model.
http://julimorcreations.com/Images/G..._OM/OM_001.jpg
Two sitka spruce soundboard pairs were purchased from Alaska Specialty for $8@
http://julimorcreations.com/Images/G..._OM/OM_002.jpg
I also bought some sitka splits for the braces
http://julimorcreations.com/Images/G..._OM/OM_003.jpg
The tools I have been using so far
http://julimorcreations.com/Images/G..._OM/OM_004.jpg
Rather than making templates and forms from plans like I've done in the past, I took the lazy way out
http://julimorcreations.com/Images/G..._OM/OM_007.jpg
I milled the sitka splits on the tabla saw to the dimensions shown on the plan. To rough cut the sweep on the brace tops, I used a jewelers saw then went to planes, rasps and sandpaper to finish.
http://julimorcreations.com/Images/G..._OM/OM_009.jpg