Yes, it's a little crazy but I have this figured cherry and the boat needs a new cockpit table and...
Took the old pedestal and set it up with the table hardware and a piece of plywood to get things going.
http://julimorcreations.com/Images/K...pitTbl_001.jpg
http://julimorcreations.com/Images/K...pitTbl_002.jpg
I milled the cherry to 5/8", ripped the wide boards down the tree's center and glued the whole thing up.
http://julimorcreations.com/Images/K...pitTbl_003.jpg
And ripped it to size
http://julimorcreations.com/Images/K...pitTbl_004.jpg
In the folded position
http://julimorcreations.com/Images/K...pitTbl_005.jpg
For the trim I'm using African mahogany. This particular piece was really heavy. So I milled that to size, trimmed some corners and did a roundover on the pieces. Then rabbetted to accept the cherry boards. This would be the open position
http://julimorcreations.com/Images/K...pitTbl_007.jpg
And folded
http://julimorcreations.com/Images/K...pitTbl_006.jpg
http://julimorcreations.com/Images/K...pitTbl_008.jpg