Printable View
The 99th reason everyone needs a Moravian bench. I assembled the portable Moravian bench in the back garden to help with final work on the new bench build. That need is finished so it is back to the bench's normal storage area.
Attachment 415169
As you can see apart it takes up maybe 4 square feet of floor space. Together or apart in less than 5 minutes and a "real" bench to work on where needed. Every homeowner should have one.
ken
Need more time on mine to be 100% sure, but at this point am 95% plus certain that if I build a knockdown it will be a Nicholson.
Wow Ken, that disassembles beautifully.Quote:
Originally Posted by ken hatch
Nicholas,Quote:
Originally Posted by Nicholas Lawrence
Everyone's bench needs and wants are different. I've never built an English bench so I can't say anything about the ease of build or the portability but I do have an English style apron on one of my Roubo builds and the apron makes it a much better bench than it was before adding the apron. With that said, I expect the French/English bench is going to be pushed over against the wall so it is out of the way (in other words becomes a flat surface storage area) and replaced by the latest Moravian build. While the portable Moravian stays in it's 4 sq. ft. area waiting to be needed.
ken
Mark,Quote:
Originally Posted by Mark Rainey
Yes it does, what originally started me down the road to Moravian bench fanboy hood was looking for a bench that would fit in my motorhome side bin. Which this bench does.
Will Myers has a video of putting together a fully disassembled Moravian bench in less than one minute. It usually takes me a little longer but if I need the bench somewhere in the house or back garden from where it is now stored to being in place and useable is usually about 5 minutes or less. When finished using it putting it back in it's corner takes about the same time.
ken
Nothing against the Moravians(or anything else for that matter). If your travels bring you and your traveling RV show to the east coast, stop in and I will gladly try it out.
My thought process is really just that the lack of a vise would be a noticeable advantage in a knockdown. That, and my new Nicholson is still shiny and new enough that I can admit no flaws....
Quote:
Originally Posted by ken hatch
Wow Ken, the small area that the disassembled bench takes up is a really strong selling point. It is one thing to hear that said, but it has quite a different effect to actually see a photo of it being stored. A good thing to know. I am pretty sure that my first real bench will be one of them.
Stew
Nicholas,Quote:
Originally Posted by Nicholas Lawrence
Be careful, someday you might hear that big Cat purring in your driveway :D. The vise module on the Moravian with either a wood screw or the BC screw is pretty light and takes up little room. It is not a problem to store, move, or install. That said, my guess is about 80% of work holding is easier and even better without using a vise.
ken
Stew,Quote:
Originally Posted by Stew Denton
Thanks, I know I can be a broken record on the subject but all you need to do is work on one for awhile to fall in love. For today's woodworker it is a better bench, not that great for the mine is bigger than yours crowd and sure doesn't call for a lot of hooting and bragging but it gets the job done with great flexibility.
ken
On another forum a reply to a similar post said something like "..Thanks for moving this to its own thread. The preaching on the (other) thread was getting to be a bit much..I’m not “everyone” I guess. I don’t need a mobile/breakdown bench." Truth is he is correct, not everyone needs a Moravian bench but they sure are handy.
Attachment 415204
Attachment 415205
Attachment 415206
Attachment 415207
ken
I prefer traditional English Nicholson workbench design: clean and functional.Quote:
Originally Posted by ken hatch