3 Attachment(s)
Oneida Super Dust Gorilla - Not starting
I purchased the 2.5 hp Onedia Super Dust Gorilla Cyclone in 2008 and have used it minimally since then in my hobby shop. When I attempted to run it today it did not start, no noise from the magnetic switch or the motor. I am suspecting the switch may have died but don’t know how to check or repair short of replacing it. When I opened it, everything looked fine visually.
Any ideas on how to troubleshoot?
Several pictures of the switch are below for reference.
Attachment 445102Attachment 445103Attachment 445104