I freely admit that I do not care for sanding and finishing. If I could get away with it every project would just be rough and naked but alas, that is not a possibility so I blow it all apart and get on with it. I want it to remain light so I opt for a few coats of wipe on poly.
https://farm5.staticflickr.com/4643/...ff755c3e_b.jpg
And here we are with the finished product. I also bought a rolling work bench from Harbor Freight for more storage and work space. After using it for a bit I am quite pleased with the end result.
https://farm5.staticflickr.com/4742/...7cf8cdaf_b.jpg
Hope someone finds these posts entertaining and/or helpful!