What kind of finish to use

Hello all,

I want to make a couple of tower bars for my bathrooms. Something like this https://www.etsy.com/listing/2721204...towel-bar-wall

What would you recommend for the finish?
The towels might be damp when sitting on the bar, thus I am not sure what would be best for such case.

Thank much

I made two towel bars more than 15 years ago out of red oak. I used MinWax fast drying polyurethane as a finish. They have seen many damy towels and lots of steamy showers when the grandkids visit and are still doing just fine.

Quote:

---

Originally Posted by Lee Schierer

I made two towel bars more than 15 years ago out of red oak. I used MinWax fast drying polyurethane as a finish. They have seen many damy towels and lots of steamy showers when the grandkids visit and are still doing just fine.

---

Thanks Lee. I am a big fan of MinWax. I have been using the water based poly for several projects and still have 1/2 gallon left.
Does it matter oil based vs water based?

I would use an oil based varnish like Waterlox or arm r seal or even epiphanies. I like these a little more over minwax poly. Fwiw I have a shower bench finished in Waterlox. Still strong 5 years later.

Quote:

---

Originally Posted by joe webb

Thanks Lee. I am a big fan of MinWax. I have been using the water based poly for several projects and still have 1/2 gallon left.
Does it matter oil based vs water based?

---

I have no experience with water based poly in that application.

Quote:

---

Originally Posted by joe webb

Thanks Lee. I am a big fan of MinWax. I have been using the water based poly for several projects and still have 1/2 gallon left.
Does it matter oil based vs water based?

---

From the testing I have done, oil based poly is more durable against water damage than water borne. I would use oil based varnish.

John