Update with dimensions: 24” Invicta Bandsaw Sacramento CA

Hi guys, I won this saw in an auction but didn’t realize how large it actually was (new to bandsaws here). I’d love to find someone who wants this beauty.


The base of the machine is approximately 19” wide by 30” deep, the total depth with table is about 50” deep x 32” wide and is approximately 85” tall. It has a cnc precision ground cast iron table(25 1/2 in x 32 in, with a 45* tilt), cast iron fence and guide rail, and foot brake. It has a maximum cutting height of 12-1/4"; a blade length of 178-1/2" to 183-1/2" with a maximum blade width of 1-1/4". It has a wheel diameter of 24”


It is an Invicta saw, made in Brazil, a beautiful saw in my opinion. It is almost completely cast iron, everything looks pretty good, may need new bearings for the blade guide but they may just be gummed up. At some point the previous owner replaced the 3hp motor with a brand new 2 hp motor(the motor alone is about $700), my guess is to bring it from 3 phase to 1 phase 220.


The picture shows it with a wooden table but that was just sitting on top of the iron table. I have one resaw blade to go with it.


Would just like to get my investment back, $1500, everything I’ve seen on line for these used is about $3400. I can deliver within 1 hour of Sacramento or you can set up delivery. The saw weighs about 1,200 lbs so you will need a way to offload it. You can reach me at (210)863-9463

I Attachment 512180Attachment 512181Attachment 512182Attachment 512183Attachment 512184Attachment 512185