Printable View
I have written a detailed article that covers the differences between the SawStop Contractor Saw and the Professional Saw. This is to help anyone considering adding either of these saws to their shop.
I attempted to cover all the important points while trying not to make it too convoluted. If there is anything important that I missed, please let me know.
https://www.trentdavis.net/wp/2019/0...-professional/
Attachment 402893
Real nice write up Trent. I am not sure it is worth a change to your work, I discovered the bar of the miter gauge is improved in the Professional model. The bar has 3 spring loaded ball bearing, set screws for adjusting the side-way slop. The Contractor miter gauge bar can be swapped out with the Pro model. The bar and adjustment set screws can be ordered direct from SawStop.
Quote:
Originally Posted by Rick Brantley
That's a good one. I'll add it. Thanks for reminding me of this.
Quote:
Originally Posted by Rick Brantley
Alright, I added a section on the miter gauge. Thanks again for bringing that to my attention.