CNC down need new stepper motor
I am having an issue with a stepper motor on machine that I bought used 6 years ago. The company that makes it is out of business and I need to find a replacement. Most new NEMA 34 motors are using a 1/2" shaft and this one has a 3/8" shaft. I do not mind a bigger motor as I have plenty of space and have updated Gecko drivers but need to work with the pulleys and belt size I have. Here is the info I have.
Current Motor
MCG IH34110
Does not need shaft on both sides as only one is used.
3/8" ID with 7/8" OD .080 pitch
PullyAny recommendations on motors and or pulley combinations would be great.
