Printable View
A while back I bought a lot of tools at an estate and I'm left with a whole bunch of router cutters and I can't find which router it goes with. Those small 1/4" cutters don't fit Stanley 71 or 71-1/2, Veritas or Stanley 271. Any idea?
The left cutter is for a Stanley 271, the centre one is the mysterious one and the one the right is a regular cutter for Stanley 71.
NormandAttachment 360495
Good morning Normand, that looks just like one of the cutters that came with my Sargent #62.
jtk
Thanks for your help Jim. The following picture shows a different kind of cutter and I believe that it would fit a Sargent because the vertical portion of the cutter has multiple notch.
Attachment 360505
While looking for some info I found a Record router plane.
http://www.ebay.ca/itm/No-071-Router...kAAOSwrhBZBi3F
It really look like mine.
Normand
Not sure of the timeline on this, but I have heard Record licensed Stanley designs.Quote:
While looking for some info I found a Record router plane.
http://www.ebay.ca/itm/No-071-Router...kAAOSwrhBZBi3F
It really look like mine.
My Sargent router also looks pretty much like a Stanley router.
As for the multi notched cutter I haven't seen that before. Do the notches look like factory originals?
jtk
Interesting. It looks a lot like the original design of the cutters on the Stanley 71/71-1/2.
Yes, the notches are original. If you look here,
http://www.jimbodetools.com/SARGENT-...er-p50811.html
you will see a Sargent router but have a close look at the nut used to adjust the depth. It's outside diameter is a large screw that fit into the notches of the cutter.
That is an interesting design with the threaded piece to adjust the cutter depth.Quote:
Originally Posted by Normand Leblanc
My Sargent router plane doesn't have that feature.
There are a few on the auction site. Rust bucket grade with bids ~$32 and what looks mint with box ~$200 from the UK.
jtk