My bandsaw push stick, creating after reading the October 2014 issue of Fine Woodworking
https://www.youtube.com/watch?v=CE-j2lZxjig
Printable View
My bandsaw push stick, creating after reading the October 2014 issue of Fine Woodworking
https://www.youtube.com/watch?v=CE-j2lZxjig
Good idea. Thanks for sharing that.
It is a good idea! Thanks. -Howard
By comparison to where I put my push stick for my table saw I would consider that a little difficult to reach easily. I think I would rather it be hanging. Vibration is probably also going to let it move forward or back.
I use velcro to hold my pushstick onto the bandsaw. Easy to grab.
Please the video below from 9 minutes 20 seconds This is the best aid I have seen
https://www.youtube.com/watch?v=zNmaJfYmYxo&t=562s
Put a rare earth magnet in the finger hole and hang it on the upper wheel cover. It would be at eye level and still available if you ate using the miter slot.