Keith, the crv file does have toolpaths but is too large to upload.
Printable View
Keith, the crv file does have toolpaths but is too large to upload.
Likewise. My crv file in compressed form is just over 2 MB in size.
David
I updated the zip file size to 3 meg. Try your uploads again.
I hope that I got it right :)
Here are my .crv files. PM if you have questions.
Mine is not as sophisticated as the one from Bruce. I simply did a trace of Keith's original image and ran a single tool path just to see what it would look like.
David
Attachment 437532
I should cut that on the plasma.
Here is the "plasma friendly" cut file - so the center won't drop out.
David
Attachment 437948
Attachment 437947
Any got the original .svg or some other vectored file format version they can post? Thats a great idea!
Several dxf files posted already in previous posts. These were/are attached as zip (compressed) files due the large file size. Would you like svg instead of dxf?
David
Here is the file in svg format. It is compressed, so you will need to extract from zip format to svg format.
David
Attachment 438581
Attachment 438582
Oh my granddaughter would absolutely love this! Thanks for the file!!!
Don't have a CNC, but I do have Oreo's in the house, so it really is cookie time!