Any suggestions. It was working fine. Added staples when it ran out and now it shoots but no staples come out. It leaves a good size indent from the air and I do not see any blockage.
Printable View
Any suggestions. It was working fine. Added staples when it ran out and now it shoots but no staples come out. It leaves a good size indent from the air and I do not see any blockage.
The indent is from the firing pin which tells you it's working. Something is not allowing the staples to advance would be my guess. Could be something quite simple.
It’s got to be. Maybe if I just look it tomorrow it’ll be obvious
First up would be to just try to push them forward.
Did you open the front of the gun to see if there was a “hanger” in there?
Yep and for whatever reason it seems to be working fine this morning. I appreciate all the help though.