Marquetry tutorial (finished w/lots of pics!)
Some have asked for a tutorial on some of the marquetry and inlay I feature in my work so here goes: I am going to do this in multiple posts so I can add the pictures as I go.
This one I will just talk about the marquetry fan like the ones you see here:
http://www.sawmillcreek.org/showthread.php?t=87725
Later (if there is interest), I could do one for string inlay, muti-layered inlay, and marquetry pictures.
The inlay fans are not hard to do but like most things there is a process.
First, I chose a design. In this case the design can be used to make the 1/4, 1/2 or full circle inlay motifs like the ones you can buy online.
The basic materials I used are:
Cutting mat
Exacto knife
Gouge
Sand
Hot plate
various veneers (for this I used dyed maple for the black, you can use whatever types of wood you want, just try to contrast as much as possible).
Veneer tape
Router w 1/8 inch spiral down cut- An up cut spiral will pull the fibers of the wood up…you don’t want that.
Compass
1/8 inch hard board
Card scraper
Wax paper
I hope this explains it well and you all enjoy!
If not, hopefully I can answer any questions... or at least someone from the creek will.:)
Dewey
Fixes completed by the Moderator
All,
Luckily we have great mods here and I guess i have been behaving well since Ken offered and then fixed the mistakes on this post
:)<--- this is Dewey happy again!
Jim... thanks for a fresh set of eyes!
Dewey