Chinese laser purchase/Shenui/Laserworks tips and tricks thread
Considering a lot of us are going or have gone that direction , I thought it a good idea to combine our knowledge pool in one thread. So I have started one. Those of you that have already posted to other threads can perhaps repeat and consolidate the posts here or at least point to other posts on the forum as links
Here's Mine
http://www.sawmillcreek.org/showthre...hes-from-China
http://www.sawmillcreek.org/showthre...s-they-re-here-!!!
I have a situation where I cannot really mess with the finer points of my lasers and the software as we really are using em as workhorses and they are loaded up with jobs all day long so guys like John , Rich , George etc who are really putting em thru their paces will have invaluable info.
A good idea is to perhaps work together to explain and explain the effects of all the settings and the chinglish words.
8 Attachment(s)
adjusting K40 machines part1
Hi all,
I was warned in all the foren about tolerance and quality of the chinese cheap laser, thats why I started after receiving my K40 machine right a way to check out all the very important parts for accuracy. later a few buddys of mine who had there machines
allready but had the same accuracy problemes like everybody else needed help and I try to explaine but that did not work out thats why I made a series of pictures with the steps what should be done .
and here they are.
the first section is the main part the lasertube and mirror #1 ( the one closest to the tube
the second section is all the mechanical parts and the laser beam it self on the picture is the explanation what sould be done.
greetings
waltAttachment 224058Attachment 224059Attachment 224060Attachment 224061Attachment 224062Attachment 224063Attachment 224064Attachment 224065